Hello everyone, I needed some info on the description of a thread styli (Item #4 in picture) in the Probe utilities/Probe description dialog box for PC-dmis 2011 MR1? I looked for it but did not find anything similar in the probe builder dialog box with a thread styli probe description (Item #4 in picture). Not sure if I can upload a file from Hexagon Metrology that would give me access to thread stylis? Machine specs Brown & Sharpe Gage 2000 with a PH10T head and TP20 module. Thank any response would be most appreciated.
It's really hard to see your picture, but PC-DMIS doesn't support thread styli. To measure a thread (I'm assuming you need location) use a small styli diameter, construct a circle and use the pitch option. Other option is to use true position locators.
http://www.lavezzitrupos.com/locators.aspx
It's really hard to see your picture, but PC-DMIS doesn't support thread styli. To measure a thread (I'm assuming you need location) use a small styli diameter, construct a circle and use the pitch option. Other option is to use true position locators.
http://www.lavezzitrupos.com/locators.aspx