Hello, all!
(I'm ignorant. Tear me apart!)
This is the first time I've come across this type of call out. I understand a bit about how it works, but need help with the execution.
Could someone, please, walk me through the general steps I'd take…
Good Afternoon
1st time I'm trying to use equate alignment for a long part - I used to measure part in 2 separated stages so I have 2 separated independent programs. I combined them in one program remembering to change IDs in stage 2 to avoid duplicates…
Good afternoon all,
I am trying to set up a quick program to measure a true position call out for a part we are running at the shop. it is a small bushing and the TP call out is the O.D. cylinder to the I.D. cylinder (datum A) and a perpendicular…
Hello everyone
I need to inspect TP of a tapered through hole on a cylindrical surface at a distance of R. 10.4 from center of part as shown in image,
any thoughts on how this can be inspected..
Attached Files
I am trying to set the datum, but I wonder if there is a way to set the datum a when datum A is a curved surface as shown in the figure.
version : pc-dmis cad++ 2018 r1
Hi there,
I need help. I've received a ASME drawing in inches from a client (i usually work on ISO and with mm) and they've demanded that I measure a position with the MMC condition in the hole and for each datums (B and C).
The thing is that i…
Good evening everyone!
I’m extremely new to CMMs, GD&T, and pretty much anything to do with this whole world. (>4 months) My employer found themselves in a tight spot when our old CMM Operator/Programmer left for another company. The previous employee…
I Have trouble when showing True Position on FCF,
There is some information i want to hide or delete, that is location on Datum which shown in Position tab, that information come when i add secondary and tertiery datum with MMC or LMC on True Position…
Is this important?
I would imagine so, considering all the parts have datums, but what is the difference from, say, setting a point as Datum A and dimensioning a feature to Datum A, and setting a point and dimensioning a feature to said point?