We run PC-Dmis 2013 MR1 with DATAPAGE + it takes up to 10 minutes for the report to populate after the program is done running with the Datapage turned on if you mask out the datapage command the report is done is 10 seconds or less
We run PC-Dmis 2013 MR1 with DATAPAGE + it takes up to 10 minutes for the report to populate after the program is done running with the Datapage turned on if you mask out the datapage command the report is done is 10 seconds or less
If using External Command
put this at the beginning of program(right after DCC/MODE)
EXTERNALCOMMAND/NO_DISPLAY, NO_WAIT ; C:\PROGRAM FILES\WAI\DATAPAGE+ 5.0\DATAPAGESTATS.EXE -listening (or just -L) has to have a space after .EXE
We run PC-Dmis 2013 MR1 with DATAPAGE + it takes up to 10 minutes for the report to populate after the program is done running with the Datapage turned on if you mask out the datapage command the report is done is 10 seconds or less
If using External Command
put this at the beginning of program(right after DCC/MODE)
EXTERNALCOMMAND/NO_DISPLAY, NO_WAIT ; C:\PROGRAM FILES\WAI\DATAPAGE+ 5.0\DATAPAGESTATS.EXE -listening (or just -L) has to have a space after .EXE
