Is there a way to get some of the data from PC-DMIS forms on to Data-Page reports like statistics, PPAP, & or spreadsheet forms. When I use the command feature, input, YES - using this I have like a cavity ID in some of my programs where it shows up on the PC-DMIS report but it is not in Data-Page. It would be nice to be able to do this if it can not be done.
C1 =COMMENT/INPUT,NO,FULL SCREEN=NO,
Input Part Number:
C2 =COMMENT/INPUT,NO,FULL SCREEN=NO,
Input Part Name:
C3 =COMMENT/INPUT,NO,FULL SCREEN=NO,
Input Revision:
C4 =COMMENT/INPUT,NO,FULL SCREEN=NO,
Input Customer Name:
C5 =COMMENT/INPUT,NO,FULL SCREEN=NO,
Input Operator Name and Title:
C6 =COMMENT/INPUT,NO,FULL SCREEN=NO,
Input Cavity:
Yes, the newer versions of DataPage do allow filtering by "tracefield".
Also, for DP+ 5.2, you don't need to assign the comment inputs to variables, they are automatically seen as tracefields. For older versions of DP+ (not RT), you need to assign the comment inputs to a variable first.
And then you need to edit the header of a report to show your tracefields.
Vinni is correct, you will either need to create a custom header or you can also add a text box to your report but as long as your trace fields are in the part program then you should be able to pull them into your report.
Vinni is correct, you will either need to create a custom header or you can also add a text box to your report but as long as your trace fields are in the part program then you should be able to pull them into your report.
