hexagon logo

DP+ datapagestats.exe parameters list

I was looking at the Wilcox ftp site for the documentation of newer versions of DP+ with no success (Datapage+ 2013???). What I need is a full list of parameters for the datapagestats.exe command, these are some of them that I'm aware of, If you know some more please let me know.

-L (listening)
-E (end)
-R (reset)
-S (settings)

Thanks for your help.
Parents
  • I was looking at the Wilcox ftp site for the documentation of newer versions of DP+ with no success (Datapage+ 2013???). What I need is a full list of parameters for the datapagestats.exe command, these are some of them that I'm aware of, If you know some more please let me know.

    -L (listening)
    -E (end)
    -R (reset)
    -S (settings)

    Thanks for your help.


    The DataPageStats.exe command supports the following parameters:

      • No parameters
        This starts DatapageStats in the default ReceiveAll mode. See "DataPageStats Working Modes" below.
      • -l or -listening
        This starts DataPageStats in Listening mode. See "DataPageStats Working Modes" below.
      • -e [mode] or -end [mode]
        This ends the previous DataPageStats instance. [mode] determines the termination type. If mode is not used, or if mode is a 1, it indicates success. Any other value indicates a failure. A failure tells DataPageStats to not import the data file into DataPage+.
      • -s or -settings
        This displays the Settings dialog box.
      • -r or -reset
        This abandons the XML data currently being gathered and continues to gather data with the next PC-DMIS command.

    Copied directly from the help file. These are all the available commands for the the external method.
Reply Children
No Data