When we printed out data from PC.Could we arranged data from 1, 2, 3,...? Because of we checked ponit follow as drawing but not follow point. Sometime we checked at point 100 first and come back to checked at point 50, 51 some thing like this.
I think he has numbered dimensions on the print but doesnt measure them in the order they are numbered(who does?) but he wants to report them in numerical order. If you report them as you measure them, you cant, but if you report them at the end of the program then you can put them in any order you want as long as the reference frames are correct during reporting...
When we printed out data from PC.Could we arranged data from 1, 2, 3,...? Because of we checked ponit follow as drawing but not follow point. Sometime we checked at point 100 first and come back to checked at point 50, 51 some thing like this.
You can create a macro in datapage and have dim's arranged the way you need.
I had 10 circle diameters (CIR0..CIR9).D measured. I can create a variable set starting with CIR9 going down to CIR0 and can produce a report in that order. I do not know what report/chart cha po is trying to produce so I can not say if this would work or not. When PCDMIS sends data to Datapage a set called "MEAS_ORDER" is created to produce reports in the order in which the data was executed (or at least sent to datapage).
