Trouble with Tracefields..

Here's the code, but it's not working. I want the operator to enter a part # and then use that as a tracefield. I know it works, I've seen it in class. Any thoughts???

MOVE/POINT,NORMAL,<0,0,150>
C2         =COMMENT/INPUT,YES,'Part #'
            TRACEFIELD/NO_DISPLAY,LIMIT=15 ; Part # : C2.INPUT
TOP        =FEAT/PLANE,CARTESIAN,TRIANGLE
            THEO/<4.615,-4.134,-0.008>,<0.0004528,-0.0015137,0.9999988>
            ACTL/<4.628,-4.153,0.014>,<-0.0020628,0.0000603,0.9999979>
            MEAS/PLANE,7
            MOVE/CLEARPLANE
            HIT/BASIC,NORMAL,<12.064,7.777,0.002>,<0.0004528,-0.0015137,0.9999988>,<12.06,7.75,0.03>,USE THEO=YES
            HIT/BASIC,NORMAL,<8.805,4.919,0.008>,<0.0004528,-0.0015137,0.9999988>,<8.891,4.987,0.011>,USE THEO=YES
            HIT/BASIC,NORMAL,<15.105,-2.742,-0.012>,<0.0004528,-0.0015137,0.9999988>,<15.025,-2.745,0.052>,USE THEO=YES
            HIT/BASIC,NORMAL,<7.399,-6.636,-0.011>,<0.0004528,-0.0015137,0.9999988>,<7.467,-6.644,0.011>,USE THEO=YES
            HIT/BASIC,NORMAL,<4.369,-12.652,-0.023>,<0.0004528,-0.0015137,0.9999988>,<4.395,-12.669,0.006>,USE THEO=YES
            HIT/BASIC,NORMAL,<-4.395,-11.823,-0.017>,<0.0004528,-0.0015137,0.9999988>,<-4.399,-11.94,-0.004>,USE THEO=YES
            HIT/BASIC,NORMAL,<-11.042,-7.779,-0.007>,<0.0004528,-0.0015137,0.9999988>,<-11.043,-7.81,-0.011>,USE THEO=YES
            ENDMEAS/

TIA

Parents

Matthew D. Hoedeman over 16 years ago

Here's the code, but it's not working. I want the operator to enter a part # and then use that as a tracefield. I know it works, I've seen it in class. Any thoughts???

MOVE/POINT,NORMAL,<0,0,150>
C2         =COMMENT/INPUT,YES,'Part #'
            TRACEFIELD/[COLOR="Red"]NO_DISPLAY[/COLOR],LIMIT=15 ; Part # : C2.INPUT
TOP        =FEAT/PLANE,CARTESIAN,TRIANGLE
            THEO/<4.615,-4.134,-0.008>,<0.0004528,-0.0015137,0.9999988>
            ACTL/<4.628,-4.153,0.014>,<-0.0020628,0.0000603,0.9999979>
            MEAS/PLANE,7
            MOVE/CLEARPLANE
            HIT/BASIC,NORMAL,<12.064,7.777,0.002>,<0.0004528,-0.0015137,0.9999988>,<12.06,7.75,0.03>,USE THEO=YES
            HIT/BASIC,NORMAL,<8.805,4.919,0.008>,<0.0004528,-0.0015137,0.9999988>,<8.891,4.987,0.011>,USE THEO=YES
            HIT/BASIC,NORMAL,<15.105,-2.742,-0.012>,<0.0004528,-0.0015137,0.9999988>,<15.025,-2.745,0.052>,USE THEO=YES
            HIT/BASIC,NORMAL,<7.399,-6.636,-0.011>,<0.0004528,-0.0015137,0.9999988>,<7.467,-6.644,0.011>,USE THEO=YES
            HIT/BASIC,NORMAL,<4.369,-12.652,-0.023>,<0.0004528,-0.0015137,0.9999988>,<4.395,-12.669,0.006>,USE THEO=YES
            HIT/BASIC,NORMAL,<-4.395,-11.823,-0.017>,<0.0004528,-0.0015137,0.9999988>,<-4.399,-11.94,-0.004>,USE THEO=YES
            HIT/BASIC,NORMAL,<-11.042,-7.779,-0.007>,<0.0004528,-0.0015137,0.9999988>,<-11.043,-7.81,-0.011>,USE THEO=YES
            ENDMEAS/

TIA

It is set to NO_DISPLAY, double click on it and hit F8

Reply

Matthew D. Hoedeman over 16 years ago

Here's the code, but it's not working. I want the operator to enter a part # and then use that as a tracefield. I know it works, I've seen it in class. Any thoughts???

MOVE/POINT,NORMAL,<0,0,150>
C2         =COMMENT/INPUT,YES,'Part #'
            TRACEFIELD/[COLOR="Red"]NO_DISPLAY[/COLOR],LIMIT=15 ; Part # : C2.INPUT
TOP        =FEAT/PLANE,CARTESIAN,TRIANGLE
            THEO/<4.615,-4.134,-0.008>,<0.0004528,-0.0015137,0.9999988>
            ACTL/<4.628,-4.153,0.014>,<-0.0020628,0.0000603,0.9999979>
            MEAS/PLANE,7
            MOVE/CLEARPLANE
            HIT/BASIC,NORMAL,<12.064,7.777,0.002>,<0.0004528,-0.0015137,0.9999988>,<12.06,7.75,0.03>,USE THEO=YES
            HIT/BASIC,NORMAL,<8.805,4.919,0.008>,<0.0004528,-0.0015137,0.9999988>,<8.891,4.987,0.011>,USE THEO=YES
            HIT/BASIC,NORMAL,<15.105,-2.742,-0.012>,<0.0004528,-0.0015137,0.9999988>,<15.025,-2.745,0.052>,USE THEO=YES
            HIT/BASIC,NORMAL,<7.399,-6.636,-0.011>,<0.0004528,-0.0015137,0.9999988>,<7.467,-6.644,0.011>,USE THEO=YES
            HIT/BASIC,NORMAL,<4.369,-12.652,-0.023>,<0.0004528,-0.0015137,0.9999988>,<4.395,-12.669,0.006>,USE THEO=YES
            HIT/BASIC,NORMAL,<-4.395,-11.823,-0.017>,<0.0004528,-0.0015137,0.9999988>,<-4.399,-11.94,-0.004>,USE THEO=YES
            HIT/BASIC,NORMAL,<-11.042,-7.779,-0.007>,<0.0004528,-0.0015137,0.9999988>,<-11.043,-7.81,-0.011>,USE THEO=YES
            ENDMEAS/

TIA

It is set to NO_DISPLAY, double click on it and hit F8

Children

No Data