Does anyone have a trick to get Q-QIS to pull in GeoTol data for true positions having multiple features reporting out in the same True Position output. For example, here we will have 99 times hole pattern sets were we will put them all in the same true position call out.
Using PC-DMIS 2021.2 below is a 10x's that doesn't move to the O-QIS file. I have a support ticket put in for it. We will see what they say.
DIM113 =GEOMETRIC_TOLERANCE/STANDARD=ASME Y14.5,SHOWEXPANDED=YES,
FEATURE_MATH=DEFAULT,DATUM_MATH=DEFAULT,DISPLAY_CO ORDS=DRF,
UNITS=IN,OUTPUT=BOTH,ARROWDENSITY=100,
SIZE/NOMINAL=0.21905,UPPER TOLERANCE=0.00385,LOWER TOLERANCE=0.00385,
REPORT_LOCAL_SIZE=OFF,
CIR109_1:
UAME SIZE:0.219191,
CIR109_2:
UAME SIZE:0.218938,
CIR109_3:
UAME SIZE:0.219374,
CIR109_4:
UAME SIZE:0.219172,
CIR109_5:
UAME SIZE:0.219372,
CIR109_6:
UAME SIZE:0.219712,
CIR109_7:
UAME SIZE:0.219043,
CIR109_8:
UAME SIZE:0.218955,
CIR109_9:
UAME SIZE:0.219582,
CIR109_10:
UAME SIZE:0.219221,
SEGMENT_1,POSITION,DIAMETER,0.02,MMC,A,B,MMB,<size >,__,C,MMB,<size>,__,
TEXT=OFF,CADGRAPH=ON,REPORTGRAPH=OFF,MULT=10,
MEASURED:
CIR109_1:0.002993,
CIR109_2:0.002925,
CIR109_3:0.003309,
CIR109_4:0.003428,
CIR109_5:0.002490,
CIR109_6:0.003505,
CIR109_7:0.001461,
CIR109_8:0.001570,
CIR109_9:0.003487,
CIR109_10:0.002104,
ADD
DATUMS/REPORTDATUMSIZE=OFF,
B(CIRB):NOM=32.169996,+Tol=0.01,-Tol=0.01,
C(CIRC):NOM=0.2518,+Tol=0.00025,-Tol=0.00025,
FEATURES/CIR109_1,CIR109_2,CIR109_3,CIR109_4,CIR109_5,CIR10 9_6,
CIR109_7,CIR109_8,CIR109_9,CIR109_10,,
