I have just started using Q-Das and one of the questions I have, is how do I link a key number to the catalog? I inserted screen shots to help explain. In the q-das configuration in pcdmis the machine value(upper right corner) has a Key number of K2063 and then in the default catalog for machine has a Key number is K4060. Is there another setup or configuration that I need to go to, to make sure they are linked. This was set up previously so not sure what steps I need to take.
So in the configurator you can select which one shows up, then link to it via the Tracefield command in your routine. If you go into KField Configuration, you will see a variety of checkboxes. You will see that K2063 is checked. You can then check K4060 and reference it via the Tracefield. I hope I'm understanding this correctly.
So in the configurator you can select which one shows up, then link to it via the Tracefield command in your routine. If you go into KField Configuration, you will see a variety of checkboxes. You will see that K2063 is checked. You can then check K4060 and reference it via the Tracefield. I hope I'm understanding this correctly.
