hexagon logo
Register Sign in
  • Replies 7 replies
  • Subscribers 15 subscribers
  • Views 515 views
  • Users 0 members are here
Options
Related

ISO 1101 Position tolerance

Sekarkm
Dear Quindos experts,

I am learning quindos 2020.2 with basic training given by the cmm supplier and installer. I am having difficulties to evaluate the ISO position tolerance for inner and outer cylinder (hole and pin). I have measured the elements as cylinder and as a basic circle. The position tolerance for the circle I used the command POSITNXY with circle tolerance zone and got the result as expected with X_correction and Y_correction ActualValue. I can understand the value is the difference from Act vs measured. If the measured value is plus(more) it shows with X correction -0.0000 and oppsite for less.


Could you please explain how to evaluate the position tolerance for the measured cylinders using the position (POSITN) command. I mean all the correct inputs for this command to get the position tolerance as per DRF.

What is the X and Y correction values and how to understand?

I just enclosed the rough sketch and the snip from the results.

Thank you for your kind help.

Regards,



Attached Files
Parents
  • ...Type in MIN=0, MAX=35, TYP=CYL in the command POSITNXY.

    POSITNXY is a derivate from POSITN.


    Hi Quindos Team,

    Thank you again for your help and support.

    There is no option to input Min and Max in the POSITNXY command but in the POSITN command have this input. I have tried using POSITN with min and max different data input and checked the result and compared the position. Hope I am doing the correct way to get the position tolerance as I said. Please see the print screen.

    Please confirm all the option input data are correct.

    Thank you.
    Attached Files
Reply
  • ...Type in MIN=0, MAX=35, TYP=CYL in the command POSITNXY.

    POSITNXY is a derivate from POSITN.


    Hi Quindos Team,

    Thank you again for your help and support.

    There is no option to input Min and Max in the POSITNXY command but in the POSITN command have this input. I have tried using POSITN with min and max different data input and checked the result and compared the position. Hope I am doing the correct way to get the position tolerance as I said. Please see the print screen.

    Please confirm all the option input data are correct.

    Thank you.
    Attached Files
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement