hexagon logo
Register Sign in

Browse By Tags

  • Problem Scanning Trailing Edge of a Partial Ended Section

    I've encountered a problem scanning the trailing edge of a HGV blade. The blade has 3 sections, 2 work fine, 1 doesn't. The trailing edge is of a 'partial end' type. DMIS scans all 3 sections perfectly well. My nominal files are all good, the data…

  • Adobe creating duplicate report page?

    I am using PCDMIS 2011 MR1 measuring blades. The data is sent from pcdmis into Blade for analysis. I get a 27 page report in blade which includes plots of the measured sections of the blade as well as numerical text of the dimensions within each section…

  • HELP! Database error -19-

    I am scanning airfoil sections on a turbine blade and i have run into a puzzling issue. I am using bladerunner and i can get my program to run with no problem. However, when it goes to blade to analyze it, the error comes up "Database error -19-" then…

  • Smoothing out LE/TE radius for Blade

    I have scanned an airfoil with an SP600 with a 2X40 tip. When i view my scans in Blade the profile looks pretty good except at the leading and trailing edges. For some wierd reason the spline looks jagged at the ends. the probe does not lose contact with…
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement