Hello,
Does anyone have implemented to save the report CAD View images produced by the Snapshot commands as each image file such as bipmap (.BMP)?
It would be great if you can share something similar code or advise me.
Thank you in advance.
…
My company has recently upgraded from the 2017 version of PCDMIS to version 2022.1 SP4, now this has been a pain free update as far as I can tell, that was until I started trying to create a new custom report
Previously when using a custom report…
Hello everyone
I need to inspect some gage on a circular part as shown in image.
1st case : Diameter should be kept constant and distance to be inspected
2nd case : Distance should be kept constant and dimeter to be inspected
how should I proceed…
I have a Basic Script at the beginning of my program that prompts the operator to enter the serial number of a part. Then at the end of the program I have an excel form report being created and auto-saved as the serial number.
I would like to accomplish…
Where I work I very frequently have position dimensions called out in sets. When the DRF is not fully constrained, or when there are MMB modifiers on datums, its critical to call the holes out as sets so any Datum Shift is the same for all the holes in…
I've got a part here that requires hundreds of inspections, so we created a fixture to run 15 of the parts in one execution so i'm not required to come back to the CMM every few minutes. I've hit a wall though where I need my reports to print per part…
I am trying to figure out a way to automatically mark or unmark feature dimensions that are out of tolerance.
I have a program that includes some if/then statements where it re-measures a diameter at a different depth if the first one is OOT.
So my…
Hello everyone,
I got a problem.. When the measurement ends I want to save report to specific location, depending on where the part was made (we have same part, but we make it on 2 machines)..
I am using PRINT command, but it sometimes saves blank…
I have a diameter that is very slightly tapered but is square within CAD. From the top surface, I measure the diameter every 0.5mm measuring about 10 cirles in all.
Im trying to figure out how to report ONLY the smallest diameter and not all 10 diameters…
Hello
I'm farily new to PC-Dmis, using a romer arm atm.
How do i re-measure something after my program is done and the report generated?
I have highlighted the elements that i want to remeasure and chosen "execute block".
And everything…
