Dear,
I do not know whether someone will give the feedback, may be my questions are always too detail.
I am using the CAE enhancement in Marc, Signed Von Mises stress is used to find the life, difficult mean correction methods are check to understand…
Dear,
In here, three options are shown, my question is about the Maximum Principal option. In the help, this option is explained by " This is the principal stress with the largest magnitude ".
For an example, S1=-100MPa, S2=-200MPa, S3=-300MPa…
I am modeling roll forming processes using solid elements. Is there a way to visualize the sheet thickness after forming? The element scalar "Thickness of Element" only seems to work on shell elements.
I'm using Marc 2020 and have been trying to implement user subroutines, for which I've installed Microsoft Visual Studio 2017 and Intel Fortran Compiler via Intel's oneAPI toolkits. However, I haven't been able to properly run the program with subroutines…
How can you export deformed Axisymmetric 3D model in Mentat or 2D deformed that I can click on curves to revolve? I know to rezone mesh, save and new .mud file , and how to expand to 3D . However, I can not export as .igs or .stl that creo will read.
I am working on in-service sleeve repair welding of gas pipelines using MSC MARC for calculating the transient temperature distribution (Thermal analysis). Two half-sleeves are assembled around the damaged pipe section with a longitudinal butt weld and…
I'm using Marc to simulate the moving heat flux applied to the plate. The maximum temperature reached and cooling curve seems reasonable but there is an initial dip down in the temperature just before rising up. Initially, I was using first-order elements…
Hello i am trying to setup parallel computation using two computers running RHEL 7.7
laptop (hostname dell-laptop) is master computer, workstation (hostname workstation) is second computer
my host file is:
dell-laptop…
I am submitting a job in Marc-Mentat and the status shows "Running" but the analysis is not progressing. Usually I check the analysis by looking Wall-Time change and also the computer starts to make sound (fan noise) but neither Wall-Time increase nor…
I want to get the mathematical equation of bezier curves that I generate in Marc. I am currently using my in-house python script to generate many bezier curves in marc. However, to make some mathematical manipulation, I need to get the mathematical expression…
looking for 1D element structural Analysis model with various loading conditon.
for ex. Wind load, Gravity load, arth quake load,
how to connect 1 D elements if model buildin g with Apex.Connectivity explaination.
I tried to perform an analysis with over 4 million tetrahedral elements. I got the error below. How can I solve this problem. I am using out-of-core, multiple threads and MUMPS solver.
I am trying to define bilinear traction-separation properties for interface elements. The first picture above is taken from Marc-Mentat 2021.1.
In the first picture Marc prompts to enter cohesive energy, critical opening displacement and max…
The picture above is taken from the user's guide of Marc-Mentat 2021.1 (e022). As you can see from the picture, the cohesive part has the same mesh with top part. How can I create these zero-thickness elements between two sets of elements?
…
The figure above is a picture that I found in internet and it shows a nano-composite with matrix and reinforcing phases. As you can see, the mesh of reinforcing phase matches with the mesh of the matrix. How can I perform this meshing in Marc-Mentat?…
