hexagon logo
Register Sign in

Browse By Tags

  • Excel Form Report-Bonus

    Does anyone know a way to add the bonus column to an excel form report?

  • Exact measure datum shift error

    I have come across another issue that im having with exact measure ( i have not tried this on "geometric tolerance command" yet). The problem i am having is the datum shift when applied thru simultaneous evaluation (s.e.) is making erroneous datum shifts…

  • Reporting Bonus Tolerance

    Hey all, Does anyone know if there is a way to automatically add the bonus tolerance of a position onto the tolerance on the report. It would help out inspectors if the total tolerance was displayed. I don't get why it calculates the total for a position…

  • Report redrawing issue PC DMIS 2021.1

    Hi guys this is my first post so forgive me if I miss out any information, I'm recently updated to version 2021.1 (from 2020 R2) and am having an issue with positional dimensions in the "text only" report format. Everything is displayed fine when the…

  • Bonus is not calculating

    Currently i am using pcdmis 2019 cad++ when i do the position of certain features it is not calculating bonus to the position feature, when i refresh that fcloc then close the program and reopen that it is calculated but position values changes automatically…

  • Assigning/Extracting Measured Positions (XACT)

    Where I work I very frequently have position dimensions called out in sets. When the DRF is not fully constrained, or when there are MMB modifiers on datums, its critical to call the holes out as sets so any Datum Shift is the same for all the holes in…

  • GD&T Settings Resetting to Default After Execution (True Position)

    All of my FAIRs and FIRs are bubbled such that the True Position and Size are two different bubbles and require two different labeled dimensional readouts on my reports; thus, I make separate dimensions for size (diameter in this case) and true position…

  • GD&T Report Font Issues

    I recently ran into an issue when reviewing reports that shows the following for a true position measurement in a CAD view: I did some digging on both of our CMM stations thinking that one of them may have an oddball setting or a corrupt font…

  • MMC and LMC bonus within PC-Dmis

    When reporting a true position, should the Feature MMC bonus and Datum LMC bonus be added together, to give a an overall bonus. Pc-Dmis defaults to adding the bonuses. Is this correct ? The drawing call out = TP | (DIAMETRIC) 0.004 (MMC) | DATUM…
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement