When I use the COP command to export TTP strategy features in PC-DMIS it works just fine. But for whatever reason when I setup the point cloud to export scanned features, it deselects only the scanned features and never exports them in my point cloud…
I’ve been working with PC-DMIS and noticed discrepancies when analyzing surface profile callouts on grouped scanned data. Here’s what I’m observing, and I’d like to confirm if my understanding of the underlying calculations is correct.
Observations…
I work in the automotive industry and I am scanning the body of a car. I measured points with the center to probe to have for reference to possibly help align in the future to compare bodies. My PC crashed when I was in the middle of a leapfrog, and I…
At my shop, we have a radius we're trying to scan. We aligned the part using the OD and the outer edge of the part for the plane.
Then, I set up a linear open scan over the 1.412 radius (attached is a dxf of the print). We've now run into the issue…
Hi,
I am having an issue with changing our offset force. We run an offset force of 0.1N. Hexagon settings run it at 0.25N. When I change it in parameter settings and try to calibrate a probe, the Offset force reverts back to 0.25N and excess probe…
