hexagon logo
Register Sign in
  • Replies 7 replies
  • Subscribers 9 subscribers
  • Views 115 views
  • Users 0 members are here
Options
Related

GR&R Reports

JenWasch
I have never done a Gage R&R, or printed a report for that matter. Someone had done one in the past, but we need to have a new one completed and I was wondering if I could get some help.
I understand that you need at least two operators. If I looking at the old report correctly, they ran 10 parts, 3 times with 2 different operators.
What is the best way to get the results you are looking for?
Parents
  • on the Tracefield have one call it Operator and have another Tracefield and call it number. Take 10 random parts write numbers 1-10 maybe in pencil. Run the parts 3 times with one operator, after your done have the next operator do the same thing. when you get into datapage, go to that folder open it up you will see 60 parts ran. Hit settings, window will pop up, highlight the Tracefields, I had 1 for Serial number and another Operator, move them over hit ok and then you will see the name and number appear. That way you can compare 6 readings of 1 and see if they repeated and the same with 2-10
    we run with 3 operators

    We will probably only use two operators, because that is how it had been done the last time. We already use (3) comments to distinguish operator and machine numbers on a daily basis. However, would you recommend that we copy the program and change the name to something else so that the stats go to a new folder?
    Also remove the third comments so we only have part and operator?
Reply
  • on the Tracefield have one call it Operator and have another Tracefield and call it number. Take 10 random parts write numbers 1-10 maybe in pencil. Run the parts 3 times with one operator, after your done have the next operator do the same thing. when you get into datapage, go to that folder open it up you will see 60 parts ran. Hit settings, window will pop up, highlight the Tracefields, I had 1 for Serial number and another Operator, move them over hit ok and then you will see the name and number appear. That way you can compare 6 readings of 1 and see if they repeated and the same with 2-10
    we run with 3 operators

    We will probably only use two operators, because that is how it had been done the last time. We already use (3) comments to distinguish operator and machine numbers on a daily basis. However, would you recommend that we copy the program and change the name to something else so that the stats go to a new folder?
    Also remove the third comments so we only have part and operator?
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement