So I finally got my new computer for other machine. Did a fresh new install of PC-DMIS and Datapage +5.2, on windows 10. So a few of us still use the External Command, Listening at the top and End at the bottom. Well if you don't install Datapage 5.0 and install 5.2, this little knickknack don't work. spent all day with Hexagon just to find this out. Now if you put External Command without -END or -E it works which takes a while to record. You have to have Data Importer 5.0 gathering info and Datapage 5.0, and it will still show up in DataPage 5.2. Now it actually seems to work fine on my windows 7 computer, even though I have both Datapages installed, I do use the Data Importer 5.2 gathering the information, results no problem. So I'm kinda guessing this might be a Windows 10 thing. Now Stats update seems to work no problem.
One more thing to add, I'm sure Hexagon will get right on this and fix it
Actually this was what I got after running Stats in DataPage 5.2. First 6, I ran Windows 10 Last 2 put old computer, Windows 7, Same Program, tried both External, wouldn't record, Stats recorded with no results. Now both worked fine with 5.0, but nothing shows up in 5.2, but results do show up with External Command in 5.0, if I use 5.0 importer. There is a Popup that occurs when I open Datapage 5.2 in Windows 10. I will post this later, I saved this on new computer and its already unhooked. Before you say anything about did you uncheck features when you ran it, all 8 runs same program no change.
Actually this was what I got after running Stats in DataPage 5.2. First 6, I ran Windows 10 Last 2 put old computer, Windows 7, Same Program, tried both External, wouldn't record, Stats recorded with no results. Now both worked fine with 5.0, but nothing shows up in 5.2, but results do show up with External Command in 5.0, if I use 5.0 importer. There is a Popup that occurs when I open Datapage 5.2 in Windows 10. I will post this later, I saved this on new computer and its already unhooked. Before you say anything about did you uncheck features when you ran it, all 8 runs same program no change.
