This page lists all fields with defined field content, with an explanation of where the content comes from.
Content defined through the application is explained with Version V14.0.4.3.
0 No 1 Yes / DwsA part/characteristic 2 S part/characteristic 3 R part/characteristic 4 R&S part/characteristic 5 A part/characteristic 6 B part/characteristic 10 Special part/characteristic 11 Special part/characteristic BP 1 12 Special part/characteristic BP 2 13 Special part/characteristic BP 1 SPC 14 Special part/characteristic BP 2 SPC 15 R1 16 R2 17 1 18 2 19 3 20 4 22 Documentation required for safety reasons 23 Documentation required for certification 24 Relevant to production (no documentation required) 25 Relevant to manufacturing ( no documentation required) 26 Special part/characteristic F 27 Special part/characteristic L/CoP 28 Special part/characteristic S
| K-Field | Content to write | Content explanation | Example |
|
K1010 Control Item Content defined through the application |
0 | ||
K1010 Control item
K1015 Study type
K1017 Test plan status
K1250 Data Langauge
| K1010 | Control item |
| K1015 | Study type |
| K1017 | Test plan status |
| K1250 | Data language |
| K2004 | Characteristic Type |
| K2005 | Characteristics Class |
| K2006 | Control Item |
| K2008 | Group type |
| K2009 | Measured quantity |
| K2011 | Distribution |
| K2015 | Tool wear type |
| K2016 | 100% measurement |
| K2017 | Alarm detection type |
| K2018 | Acceptance limit extended |
| K2019 | Ordinal Classes Catalogue |
| K2020 | Special conditions |
| K2141 |
Unit |
###################################################################################################
This page contains all fields with defined field contents.
Contents Defined by the Q-DAS Application
Version 14.0.4.3 is used here to explain the field contents defined by the Q-DAS application.
| Field No. | Field Description | Value | Value Description | Example |
| K1010 | Control item | 0 | no documentation | |
| 1 | DwsA part | |||
| 2 | S part | |||
| 3 | R part | |||
| 4 | R&S part | |||
| 5 | A part | |||
| 6 | B part | |||
| 10 | Special part | |||
| 11 | Special part BP 1 | |||
| 12 | Special part BP 2 | |||
| K1015 | Measurement procedure scheme | undefined | ||
| Sample Analysis | ||||
| Process Capability Analysis | ||||
| Measurement System Analysis | ||||
| Initial Sample Report | ||||
| Reliability Analysis | ||||
| Analysis of Regression / Variance | ||||
|
qs-STAT
|
English: | German: |
Czech: |
|
solara.MP |
English: | German: |
Czech: |
|
Q-EMPB (Initial Sample Reports) |
English: | German: |
Czech: |
|
procella in 30 minutes The intention behind this document is to show that procella can be easy to use and easy to configure. For this, a general example will be used that can be implemented to various manufacturing environments. Nevertheless, it is supposed to serve as food for thought, since every customer has a little bit different needs and use cases. That is a beauty of procella, that it can be used and tailored for specific purpose just as customer need. |
English: | German: | |
|
Q-DM (Upload) |
English: | German: |
Czech: |
|
MCA/CMM-Reporting |
English: |
Czech: |
|
| QAE | English: | German: |
Czech: |
Contents Specified by Catalogue
K1010
K1015
K1017