When checking a surface profile in pc-dmis 2011 mr1, I have a profile and location tol of .5mm. The check shows a measurement of .335 in tolerance. When exporting to datapage+ the software shows this dim out of tolerance. Can I change this in datapage…
Can anyone tell me why in datapage+MR 1 the tolerance for true position is not shown in my results? It only gives me the x,y and z positions. I'm using PC-DMIS 2011 MR 1
Thanks
Hi All,
Like many others, still learning the in's and out's of Datapage 2011. In the R/T version, you could perform an ascii dump, edit what ever needed editing and reload. With 2011, I cannot find this anywhere and the help file doesn't offer much…
I'm not sure that I am making the right decision to upgrade to Datapage+, since the only functionality I really need is to extract the values from the CMM in an XL format, but, we are attempting to do so currently...I would have liked to have stayed with…
Good morning all,
Currently running PC-DMIS 2011 Release and DataPage+/DataView+ Release. I am in the middle of creating reports when I noticed one of my points did not match the location of a hole. Turns out the nominal moved about 20mm in Z and…
Looking for some help with this issue.
I am trying to register my copy of Data Page RT. I called Brown and Sharp aftermarket services and left a message. A rep from hexagon called and gave me the registration key. I asked the representative where…
I'm using PC-DMIS 2011 MR1 & DataPage+ MR1. When I run program that has features within the program that are looped, I only get one set of values, all the looped values in brackets are blank or null
If a program has no looping Datapage+ shows results…
Hello,
I need a little assistance. We installed the wonderful DataPage 2011 MR1 yesterday, got the SQL server all set up and it appears that all is working. However when I open datapage, I don't see the data. It is def not like the old version. It appears…
Hi
I have just used the template builder to change all the logo files in every template installed.
Now when I run Datapage+ I still get the Hexagon logo ???
It almost seems that the logo is hard coded into the template files as I cannot find…
In V2.2 I'm accustomed to saving Data Reports as an .xls for sharing, and the data was shown in rows & columns.
I'm using V3.3 now & it lets me save it rows but it doesn't save it in columns, it looks more like a 'tab delimated' format which is not…
Datapage V3.3
Never mind, I wasn't saving my tracefields properly....
I input the part S/N into an input comment in Pc-Dmis program for CMM. How do I get Datapage to printout the tracefield with the measured values (Data Report) from the program…
Can we use DataPage 2011 mr1. without CMM?
we ran castings and we need SPC charts and reports. Can we do this under DataPage by input data manually?? if so how?
Hello
Ok, so I was playing with the template builder few days ago and I was so happy that after spending a whole day creating and customizing the template I was finally ready to print reports and graphics.
Well, this morning I have decide to print…
New install of DataPage+ 2011 MR1
We are using the external command method to transfer data from pcdmis ( 2011 MR1 ) ie.
EXTERNALCOMMAND/NO_DISPLAY, NO_WAIT ; C:\PROGRAM FILES\WAI\DATAPAGE+ 2011 MR1\DATAPAGESTATS.EXE
This works fine but we…
Hello'
I have DataPage plus but I guess they have now DataPage 2011 mr1?
I have had dowload the ZIP file, however, I would like to install the program my self. Hexagon is telling me that I need the "IT" person to do the update..
The "IT" person…
Got a question regarding Profile. I have the following data and I'm having trouble with what's being reported.
Data point 1: Profile MAX is
0.010 Profile MIN is
-0.100 giving me a Profile callout of
0.110
Data Point 2: Profile MAX is
0…
Anyone know how I can get a license to use DataPage RT? I know it's no longer supported, but we use it here and the owner does not want to upgrade to PLUS. Any information is appreciated.
First off, just want to say thanks to everybody who contributes to this forum, I would be lost without it, so again thank you.
This time I would like to pose a question of my own, I rarely come across anything that hasn't been mentioned. And I have…
When I go to import CAD model into Datapage I get an error message stating the mfc100u.dll file is missing. I looked into the windows directory and the file is there and I also put this file into the working directory of Datapage.
Anyone know the…
Can I renaname a feature in datapage plus mr1?
I ran 5 parts and customer found that I named 4 points wrong. I need to run more parts and would like to rename the features in the first 5 runs and check more parts and use the first 5 runs along wth…
The CMM operators are getting an error message that "Access to C\Doc........\All....\Application Data\Wai\2011....XSTATS... was denied."
We set the Tools, Folder Options, View, to 'Show hidden files and folders" , Apply.
It worked for a day and now…
