I have a PAC2002 Tire file that was developed based on physical testing. In the "Validity Range" of the file there is an FZMAX and FZMIN value. These are based on the range of vertical loads in the testing, which I can understand.
Reading the…
I need to import a particular road created in CAD and I would like to analyze also the behaviou r of the road with the tyres.
Is it possible?
Is there any possibility to do it?
I need to include a Racing Track Kerb into a 3D flat road or another 3D road that has part of it flat. If you have a script/tool to do it and you can share it, let me know. Any ideas on how to do it are welcome
Thanks
Juan
I have an A/View model that I run successfully. I'm trying to set up a 2D Polyline road, which I have also used successfully, but am getting this error ("EVRTO"). Any ideas? I imagine I'm forgetting something easy...
---- START: ERROR ----…
O Learned Denizens,
I have, through a confluence of mellifluous events, acquired an MF6.2 model of a tyre I am interested in understanding on our vehicle. Hurray!
However, I expected the default interface built into ADAMS to be able…
O Learned Denizens, I humbly prostrate myself before your collected wisdom, as ever.
I want to compile some legacy Fortran for a user TYR501 that I successfully compiled as recently as 2019. I note with interest that Intel decline to sell me…
I had used pac_mc_120_70R17_cross.tir and 3d_bump.rdf road in my Model in Adams view 2019 where there is no need to define contac t between tire and road. But when I changed the roads to other than 3d_bump.rdf ( I tried road_ 3d_sine_example.rdf ), bike…
Is there a possibility to delete atire wheel_tire/road elements unsing CMD-script? I can only find the comands to create and modifiy atire objects but no comand to delete those objects.
I'm using Adams/Adams car on a multibody model of motorcycle which has PAC MC tire model. Can I modify the PAC MC Tire model in order to have a lateral and radial stiffness instead of a vertical stiffness ?
Hi,
I had tried to model two-wheelers for a month, and I have made the model which is quite interesting, and Adams's view has no problems to simulate it and works fine. I have used tire model 'pac_mc_120_70R17_cross.tir' for both front and rear wheel…
Hi,
My two wheeler Adams model is subjected to run through the bump of height 10 cm approx. And I am interested in the ground reaction on the rear wheel at the bump when it moves with a velocity 25 km/hr. So I have plotted the ground reaction force…
I'm using the ISO8608 based Stochastic Uneven road files. I would like a "smooth" section before I hit the "rough" section. I'm trying to use the "START = -xxxx" parameter, but it doesn't seem to do anything different if I change the number. There does…
I am simulating full vehicle (tractor with trolley) at constant velocity. I am unable to see the impact of change in rolling resistance on the vertical tire force or in general stability of vehicle. I am adjusting rolling resistance by changing "rolling…
Hi,
I am trying to run a tire blow out simulation. I made some research and it seems the easiest way to use Ftire with inflation pressure around 0 bars.
I got an ftire data with pressures with the tire tests were performed at 8.5 and 10 bars…
We got the fitted .tir files for the tire models from Stackpole Engineering, when I try to implement the tire into the model, it gives me an error.
I checked the model using the stock tires given with the fsae template, and it works fine.
…
Problem Description:
A PAC2002 model for a particular real tire was provided, which includes Steady-State, simple transient, and belt dynamics parameters.
In addition, in the tire property file
BELT_DYNAMICS = 'YES' $For switching…
Hello everybody,
In help file are written 5 parameters for setup tire graphics. Unloaded_radius, Width, Aspect_Ratio are working, i can see change of tire graphics, but changing valus of Rim_radius, Rim_width do not change graphics of tire.
…
Is PAC2002 tire model in release 2015.1 limited to MF-5.2 or has it been updated to accept MF-6.2? Documentation says PAC2002 is backwards compatible to MF5.2 but does not mention MF6.2. Thanks
I am trying to import the '*.stl' file of road geometry in COSIN/tools but I am getting following error
"error loading triangulated road data"
Please help to resolve the issue.
