hexagon logo
Register Sign in

Browse By Tags

  • Measured Probe Diameter Error Exceeds limits

    I am newer to programing and mostly just use the vision part of my machine. But seem to be having some issues with the Tactile side of my machine. Half way though probe calibration I get this "Measured probe diameter error exceeds limits." It then…

  • Unable to calibrate 2mm ball probe

    I'm fairly new to running a CMM and I'm having an issue that I'm not sure how to fix. Every time I try to calibrate the 2mm ball probe that I typically use (and have used almost daily for the past couple months), it just refuses to calibrate automatically…

  • Crash during Calibration

    Hello All, I have three CMMs running various versions of PCDMIS On one of these, a B&S One 7.10.7 running PC-DMIS 2015, I just tried to write a new probe file and calibrate it. I've done this hundreds of times without any issue, so expected the…

  • Calibration "Out of Memory" Error 2017 & 2018

    I am currently running versions 2015, 2017 & now 2018 and I have a unique problem with only one machine running 2017 & 2018 but not 2015. This machine is running in Offline mode only. When I try to calibrate a new probe angle I get an 'Out of Memory…

  • Probe calibration - Wrong parameter

    Hi all, i've got an issue with probe calibration. If i want to start tip cal, pc dmis will write that the parameter is wrong. I tried to reset tips, create new tips, call backup, copy new PROBE.dat. The machine can normally measure, but i cannot start…

  • probe Re Qualification

    I am trying to qualify 3 different probes 1. 2 mm diameter probe 20mm long 2. 1mm diameter star probe on a 20mm extension 3. 5mm diameter probe on a 50mm extension I calibrate the first probe A0B0 saying the sphere has moved then no to the other…

  • Script Help - Object Variable Not Set

    I have written a short script to check if a probe/tip used in the program requires calibration. I am not the most fluent with scripting but I have posted below what I have. Once a program is opened and executed for the first time I usually receive the…

  • Disk Calibration

    Hey all, it's been a little hectic with this disk probe and I don't know if you have came across this. My disk 18mm calibrates great but the diameter is off, I calibrate it with a ring gage and make the necessary edits until it reads the same as my ring…

  • Optics Calibration Error

    Hey everyone I am hoping I could get some help or maybe someone else has seen this error before. I have been having some problems with lighting adjustments during programming. The problem being the lighting percentage cannot go above 35%, when I try adjusted…

  • Calibrating 20X Lens Focus Range Error HOW TO FIX?

    Hey guys, Today I have been trying to calibrate my 20X Nikon Lens. Specs: Machine: Optiv 2z763 PCDMIS: 2011 Probe: Mycrona_Fixed Optiv 20X 1/2 CCD ( Something Along These Lines ) This lens has not been built on our machine before…
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement