Good Day!
I have problem with defining the database "E" like on picture below (marked on blue).
(pic. 1) (section H (circle on pic. 1))
Below photo from PC-DMIS CAD
My question is if I should make database "E" as constructed plane? All points…
Hello all,
I am hitting a major block in my programing for a cylindrical part.
After importing the CAD model and establishing an alignment, my trihedron is right where I want it. using a top plane to level the part and establish translation in…
Is it possible to update
Nominals & Tol . same for some selected features according to my drawing ?
I don't have any
CAD model , and I need to call dimensions for
100 position dimensions.
I'm using
Legacy Mode , for that reason I need…
Hello! I am having trouble trying to dimension to an intersection point created by two constructed best fit lines. The dimensions (.150 and .250) are not measuring at nominal even though it is programmed off the CAD model. I made the constructed lines…
I am unaware of any option in the settings to turn off move points. I have tried Cntrl+M typing in move/ and hitting the move point button on the jog box. I have also been trying to make a clearance plane and I cannot add move/clearplane either. Does…
I have a blueprint that has a callout to measure the depth from a specified point on my part (bottom of a specific depth) to a plane(top of the part ) . I am unsure the correct way to measure the part in order to get the correct dimension as well as which…
Hello
I'm farily new to PC-Dmis, using a romer arm atm.
How do i re-measure something after my program is done and the report generated?
I have highlighted the elements that i want to remeasure and chosen "execute block".
And everything…
I have been trying to write a program for a part and have noticed that my part print nominals aren't matching up with my CAD nominal. After looking closely at the part print, I noticed a direction arrow and a die pull arrow with a degree called out. This…
