QAE is a product that can be used „out of the box“. Users can easily gain many possibilities from Q-DAS world without any configuration. The deeper training of the functions is available by our application engineers, however thanks to easy to use interface, users are able to use the basics of the software quite quickly.
The scope of the functions in QAE was carefully decided by a group of people (developers, product managers, application engineers etc...) during the development. Even though some of the functions may be changed in the future, if more features or special configurations are needed, a switch to the full suite has to be made.
 |
Note |
|
The QAE product is exclusively for new customers and small and medium-sized enterprises, and only available in the subscription license model. The QAE product cannot be purchased together with other products (the only exception is procella for data acquisition via the RS232 interface). If other products are required, you must switch from QAE to the Full Suite products. |
|
Button Bar in QAE The button bar is the central tool for the user. All basic functions are contained on it. Therefore, this is the first document in which further possibilities are described. |
English:PDF | German:PDF |
|
|
Brief introduction into QAE A brief introduction into QAE, explaining the main options and the default evaluation strategy. |
English:PDF | German:PDF | |
|
Switch from QAE to the Full Suite of Q-DAS As mentioned in the documents, the QAE is an Essentials product with the basic functions. If there is a desire for further products or extended possibilities, the products qs-STAT and solara.MP of the Q-DAS Suite must be used. this document explains the technical sales process, the simple technical changeover and the extended possibilities. |
English:PDF | German:PDF |
