So this brand new MSC FB knock off is what you guys think would attract more users ?
The "old" Forum that had more than 200.000 members and only one or two posts a day. That's suspiciously low participation and I donÄt think it's due to young…
Hello everyone,
Some help please because I'm running out of ideas.
So, I have two markers / construction frames : first one has a fix location, but the second one is dependent by the first marker.
There is a relationship…
After generating the .dll with modified target file by Adams, and generating a .esl file that I attach to my Control System in Adams, when I simalate no error appear but simulation does not run. I wonder how one should attach all the external dependencies…
Hi
I want to model the conventional damper (Force vs velocity ) in ADAMS but it should activate after certain level of suspension stroke. Example Say i want the damper to get activated post 50 mm of shocker stroke.
can someone help for the…
Trying to get a smaller bevel on a plank 3d road.
This is what I see in the help, and what I want...
Here are my settings in the rdf file (units are meters), and what I'm getting...
What am I missing?
Hello,
I am trying to model a flexible body between two rigid bodies. I want the flexible body to be compressed or depressed based on the motion of the bottom and top rigid bodies.
In this picture, the blue and green parts are rigid…
I am modeling a flex to rigid contact. In this I have two queries. First is regarding IMPACT function, it works decently well when surfaces remain in contact. But where there is frequent attach-detach scenario, I am getting random and impractical forces…
I'm trying to represent a thin preloaded cable that slides/bends around a contact surface using an FE_PART. I'm struggling to get the isotropic material properties of the FE_PART set so that it is stiff enough in tension and weak enough in bending to…
Adams v. 2021.0.1
ifort (IFORT) 19.0.4.227 20190416
/app/msc/adams/v2021.0.1/mdi -c cr-u
*** Error *** No Intel compiler was found to build the user library.
ifort --version
ifort (IFORT) 19.0.4.227 20190416
Copyright…
I have an ADAMS <=>Simulink Controls Import (as an ESL DLL) working, but it only runs the FIRST time. Running a 2nd time causes ADAMS to crash. Beside the Simulink Contorl Import ESL GSE, my ADAMS model also has a user-defined GFORCE subroutine (DLL)…
Changing Damper force has the following effect on loads
1) With default Damper properties the wheel Hub load is X and the shock absorber mount load is Y (checking the peak load & RMS loads)
2) Decreasing Damper force (i.e.., Damping coefficient…
I've got a model with contacts that is being run with several thousand cases in a Monte Carlo through the external solver. It runs statics and then dynamics. 99% of the cases run fine but a handful of them fail to obtain a static solution. The easiest…
I would like to constraint a ring to slid around a tube. The tube is a discrete flexible link and it is gradually bent by a force at one end. I would like to use point-curve constraint (PTCV) but I can't constraint the curve to the moving tube. Is it…
I am trying to run a nonlinear model using Adams Max Flex. I am defining material properties with MATDIGI card. When I run the model, I get the following error message:
*** USER FATAL MESSAGE 7831 (SCA Service Loader)
SCA SCA.MDSolver…
I have tried using a sensor as described in Article Number
000002688:
What I have so far:
-----------------------
Sensor event definition
.MODEL_1.Deformation - SENVAL(DeformationSensor)
Sensor event evaluation…
I very frequently import CAD files into view and must sometimes move them to the proper position using the precision move command. After applying joints, etc. the parts will move to the original 'pre-moved' location when the initial conditions are solved…
Hello everyone,
I am trying to run older model (2010) into newer version of Adams (2017.1) and getting following error message related to ftire (cosin 2017.1).
I have tried running with PAC tire and it works fine. So, looking for…
Hello,
I keep getting the following error when modeling a contact:
---- START: WARNING ----
The Integrator has detected a singular Jacobian matrix.
This problem may be caused by:
(a) A constraint equations…
