Hello,
I am trying to build a subroutine for the contact force calculation in a gearbox model. The reason I am trying to use a subroutine instead of the default contact formulation is to take into account the time varying mesh stiffness of…
Hi, I am trying to parametrize an ADAMS/view model, and I need to get a point X coordinates value. I tried to do something like this: .model.ground.point1.Loc_X in the point table editor, but it did not work. So, my question is if it is possible to do…
Hello,
I am simulating an experimental gearbox in Adams. When complaring the gearbox vibrations (accelerations) between the experimental measurements and the Adams requests, there is a huge difference in magnitudes. The units in Adams are in…
Working in ADAMS/CAR 2017.2 version. I am running a full vehicle simulation on a rough road (Kind of Belgian Pave road) at a constant speed.
For the Full vehicle model with Torsion and Control arm suspension bushes are set as "Standard bushes…
I am working truck model , where currenly understeer gradient value is not showning good correction with test result. To benchmark the model with Test result .we are developing steering template with compliance . Could you please share some approaches…
I have an issue with animation in ADAMS 2021.1 where I run a model with contacts turned on and the model simulates completely, strip charts update completely, but in animation, the Time Range field shows a shorter range and only replays to that point…
Hi,
This will be a horribly vague question, but I'm stumped. Here's the situation...
Full Tractor-Trailer model in A/View 2021.4.
This model has flex bodies, contacts, tires, etc., and has run successfully for years.
That is…
I import parasolid parts to assemble model. Parasolid geometry linked to a marker PSMAR (location relative to this marker). I want to move PSMAR to a different location but not move the geometry in my assembly. Can this be done?
I have read online help regarding this matter and understand that whenever we perform a standard event (for eg Suspension Analysis-----> Steering, which I am trying on one of the projects), the compliance matrix is calculated for every Joint and then…
Hi,
I'm having a cmd-file that I want to be OS independent. Therefore I need to find out on which platform I'm working on and I couldn't find anything in the documentation or here. Probably I have searched in the wrong documentation or in the…
Hello everyone,
My model, developed with ADAMS View, has a marker called "Origin" with coordinates {0.0, 0.0, 0.0} and a second marker called "Relative".
I am using 2 measurements in order to plot the displacement of Relative…
Hello everyone,
How is possible to turn off display of parts (yellow frames) in templates? I am using ACAR 2022.2. ALL parts are turned on in template interface by default now and i can not figure how to turn off display of parts frames. I…
I'm trying to set up a curve to curve contact but it keeps failing because Adams insists on putting the normal of my spline in some nonsensical direction. I've been trying to follow this help article which suggests changing the working grid but it doesn…
Hello ,everyone
I want to use multi dimension(4D) spline to look up the data.
That means there are three independent value to find out one output
Are there any example or demo for that i can learn?
Thanks a lot.
Kind Regards…
I'm trying to run a cosimulation with an A/Car model with Simulink as the master. My A/Car model use some subroutines that is included in our site solver, but the cosimulation use the standard solver. I have tried to use the "User Defined Library Name…
I am trying to create a request for Force applied on the steering wheel in park maneuver and was unsuccessful. Has anyone successfully created a request to extract force?
I am using ADAM 2021.2.2. The model i have has Gear AT elements. Sometimes when I export the CMD file and re-read the cmd file. the gear AT elements appear to be missing. I had to recreate everytime. Is this a version Issue ?
Hello,
I have an flexible MBD model of an airctaft and a loadcase for air pressure in the form of distributed loads normal to the aircraft elements. I understand that using modal forces I can insert the load to the flexbody but only direction…
I know this should be an easy one.
Seems I had a .bat file years ago I could run that would show me how many tokens I currently had in use. I think licensing has changed over the years, and either way what I have, which was using "lmstat",…
Does a full simulation need to be done with flexible tooth first to get the perturbation information for generating Fast file ? or can we always do a rough perturbation and generate a Fast file ?
