Hello,
Is there a way to print the outputs of a subroutine (C++) via the adams/vew or adams/solver windows (something similar to debug/eprint for example)? This far, the only way I've found to get some feedback when debugging my subroutines…
There is a Euler singularity in the Adams run output. We are running the SIM/STAT of the bushing model. What is Euler Singularity related to? What do we need to check to resolve the issue of Euler Singularity? Would you please give me more information…
We are running the SIM/STAT of our model, and we got the below error with an enormous number. Do you have any suggestions to resolve the enormous error in the Adams run? What is this error related to?
Hello,
When defining a bearing in Bearing AT, are the load ratings and Limiting/Reference speed mandatory to fill out? I do have some data available for them, but if they are not required to run a proper analysis, I would like to avoid using…
There is an error when i create bearing. I attached pictures about the warning messages and the model file below. Can anyone see any problem with my model which cause the failure , please tell me ?
Thanks
Giang
Attached Files (2)…
When I use Precision Move to rotate a body, the Orientation of the new part holds the rotation history. To be clear, when I rotate a body by 30 degrees about the Z axis, the new orientation looks like (0, 0, 30).
Is there a way to erase the position…
Hi everyone.
I have a model like the picture below . The shaft is made flexible, i want to put 2 bearings to support the shaft. How can i define the contact between them in MSC ADams View or Adams Modeler.
And is it possible to create bearings…
Hello,
I have created a bearing file using Bearing AT in Adams. The bpf (and all related files) were successfully produced, but whenever I try to load the bearing in Adams, it crashes. Is there any chance that my bearing is faulty even though…
Hello,
When modelling a planetary gear system throught the gears machinery module, I hot an error message of massless, non-manifold solids. I assume this was referring to the carrier created by the module. I am also having trouble understanding…
Hello,
Is possible to create functional measure for measuring stress in node during simulation?
I know just option provided by adams/durability, to see such value in postprocessor.
Thanks
Jozef
Hi everybody !
I have some problems when using Viewflex tool and when i try to import a mnf file to swap a rigid body for a flexible body . Also, some command icons don't appear in any MSC ADAMS ribbon such as the View Flex icon and MaxFlex icon…
I tried to use the following command::
LSOLVER/STABILITY=1
INTEGRATOR/ERROR=2.0E-06,HMAX=2.0E-05,INTERPOLATE=ON
SIMULATE/DYNAMICS, END=1.7, DTOUT=2e-5
DEBUG/EPRINT
lin/eigen
stop
But there is no debugging…
Hi fellow experts,
Do you guys know how corner height output is defines on adams car?
It states in ouput request that it measurement from svs ride height cil to std tire ref cil. But i could not fine the marker behind both parameter.
Thank…
Hello everybody,
I tried to simulate a bevel gear with the simplified method in Adams/Car 2019 on a Windows system. Unfortunately the simulation couldn't be started due to a library error. I also tested an example from the shared database …
I have a model with a large number of contacts. I am writing a python script that determines the number of contact pairs and then creates the corresponding contact force(s). I have design variables for the stiffness, damping, etc. in order for the contacts…
Hello,
I have made a body in my model flexible, but decided that I needed to replace the MNF file with one containing more data (more modal ICs in this case). Is there a way to replace the MNF file without having to delete the original flexbody…
I am trying to use Flexbody with Dual representation and switching the representation to Flex/Solid during the simulation so that i could reduce simulation time. ADAMS throws error when I want to give contact to the Dual Represented Flex body. Can Any…
Hello,
I have issue with models containing flexbody. Model is possible to simulate without problem, but after some while (i.e. using Play, rewind, play several time), program always start writing bunch of warnings in message window.
…
I run a .cmd file after my sims to pull certain data and write it to a text file. I would like to get some numbers at a specific time in the sim. I'm trying to use a WHILE/END loop to do this per another example I found, but it isn't working. Code below…
Hi,
I had a doubt regarding suspension characteristics array of a drive axle. As far as I know, the Suspension Characteristic Array is used by ACar to define the steer axis while doing a simulation. While defining them during template building, the…
