hexagon logo

Browse By Tags

  • First time CAD alignment

    Hello, This is my cad model and coordinate system when I import it into pcdmis. My actual part is on CMM is placed as on the picture down left. How do I transform coordinate system to other point on my CAD model? How do I align it with my actual part…
  • Mastering Move Points

    The first job I programmed CMMs at it seems that when I inserted move points in my program that it worked great and exactly like I wanted it to. I could create move points in my programs OFFLINE and they would move to the exact coordinates relative to…
  • Where can I find the CAD model for my indexing probe head?

    It's not available under my graphic Items and this would be helpful for visualizing TIP angles in offline mode to check for clearance. I have a HH-AS8-T2.5
  • Help in defining the database

    Good Day! I have problem with defining the database "E" like on picture below (marked on blue). (pic. 1) (section H (circle on pic. 1)) Below photo from PC-DMIS CAD My question is if I should make database "E" as constructed plane? All points…
  • Manual alignment not "snapping" to cad geometry

    Hello all, I am hitting a major block in my programing for a cylindrical part. After importing the CAD model and establishing an alignment, my trihedron is right where I want it. using a top plane to level the part and establish translation in…
  • Updating Nominals for Position without CAD in Vision

    Is it possible to update Nominals & Tol . same for some selected features according to my drawing ? I don't have any CAD model , and I need to call dimensions for 100 position dimensions. I'm using Legacy Mode , for that reason I need…
  • Not able to add Move Points into code or by shortcut keys

    I am unaware of any option in the settings to turn off move points. I have tried Cntrl+M typing in move/ and hitting the move point button on the jog box. I have also been trying to make a clearance plane and I cannot add move/clearplane either. Does…
  • Dimentioning Depth of a part

    I have a blueprint that has a callout to measure the depth from a specified point on my part (bottom of a specific depth) to a plane(top of the part ) . I am unsure the correct way to measure the part in order to get the correct dimension as well as which…