hexagon logo
Register Sign in

Browse By Tags

  • DatePage 5.2 Configuration of transaction display error.

    Ok, so I’m trying to make changes to the (Configuration of Transaction Display Title. AKA Transaction Title Configuration) and am getting this error: An error occurred while up dating the entries. See the inner exception for details. String or binary…

  • Cpk_sub

    I recently upgraded datapage to version 5.2. When I output Cpk in a runchart or statistics report in keeps showing it as Cpk_Sub

  • 1 Part has lost connection to my database

    So Ive had a part that I have been collecting data for over 6 months. Along comes an engineering change....I have to simply make a few programming edits, turn a threaded stud which projects onto surface into just a unthreaded nut. Edit the dimension a…

  • Data page+

    Hi everyone, I ran my database program and the results was transferred over to data page no problem, however I recognize one of my dimension was recorded as a 2d and should be a 3d, I made the change in the program and the results came out good, my question…

  • DataView or Cad Report Cad Color

    I searched for an answer and could not find one. I am using Datapage+ 5.0. When I import cad into the cad report option, if the cad is mirrored, it comes in all black, normal non-mirrored cad comes in fine. Lately I have been using the cad report tab…

  • Why DataPage?

    Hello! I've never used DataPage, and we don't have a lot of SPC at our shop (but we use other tools to inspect the parts that are run on the machines with SPC, like a tallyrond) Using the internal PC-DMIS reporter, while quirky, seems to do a…

  • Datapage+ Issue sending stats over

    I am having an issue with only a few programs sending stats over. I will run a program and then go check datapage and the entry for the transaction is there, but once I hit "apply to" all I see is my feature variables and no dimensional results. My work…

  • Datapage - Replacing CAD in datapage part

    I have an engineering change on one particular part.....So I exported a model from PCDMIS as a XAML solid. I went to replace my model in datapage and its telling me it cant because its the wrong CAD type. Maybe I uploaded an IGES at some point early when…

  • CPK fail on T Value

    I seem to be unable to get Datapage to calculate Cp or CPK on any T value. The PP is always 0.000 and the Ppk is negative... I suspect this is because my USL and LSL are the same, even though it's programmed in PcDmis as +/-. I can't change it in…

  • DP+ datapagestats.exe parameters list

    I was looking at the Wilcox ftp site for the documentation of newer versions of DP+ with no success (Datapage+ 2013???). What I need is a full list of parameters for the datapagestats.exe command, these are some of them that I'm aware of, If you know…

  • External Command Fail

    So I finally got my new computer for other machine. Did a fresh new install of PC-DMIS and Datapage +5.2, on windows 10. So a few of us still use the External Command, Listening at the top and End at the bottom. Well if you don't install Datapage 5.0…

  • Saving Datapage Report views

    Lets say I spend an hour setting up leader lines and report page views with CAD and run chart labels. I get everything the way I want it. How do I save those views so I can chose whatever parts I want......whenever I want and see this same view. I have…

  • datapage+ - uploading cad

    so ive uploaded cad to datapage before, export as XAML, go to the part number at the top right and upload. The datapage im using, i just took over for a very long tenured guy, when i go to the part and open the drop down menu all of the options to upload…

  • Question

    I have been noticing that when I save the statistics my tolerances from PC-DMIS on a slot feature do not transfer over to Data-Page, I have to go into Data Editor and manually enter them in. What can I do to keep from doing this?

  • Q-Das

    Does anyone use Q-Das / Q-Stat ? Are there any problems using it with PC-DMIS?

  • Custom excel report

    I have constructed my custom excel report and had decent success in importing all of my data. HOWEVER when it comes to my measured values. It will only bring in one of my transactions. What am i missing?

  • Automate Generating Reports

    Good Morning: I've searched the forum but didn't find what I was looking for. Is there a way to automate generating reports in datapage? In know you can save queries with a specific date range. I can just update the date range for what i'm looking…

  • 1st page of my CAD report is about 2/3 page size

    DataPagePlus_Release_5.2_SP2_734 Just installed this release, now when I create a CAD report, the 1st page is about 2/3's the page size. the other pages are fine. Installed the version to hopefully correct other issues from 5.2 SP1, and it did.…

  • Datapage - How do you export a CAD report to PDF

    I am having way to hard of a time trying to figure out how to export a CAD report to PDF. Ive looked thru the help menus.......figured I can get the answer quicker here. Im using Datapage + 5.0 Thank you!

  • Error Sending Current Stats To Datapage

    I am getting and error when trying to send stats to Datapage. Running Datapage+ 5.2. Error comes up in a PCDLRN box "Invalid object name'SID_Control'. The cursor was not declared" Does anyone have an idea what this is? Datapage was worked…

  • Change a Feature Variable Name in Dataview Report.

    I have a data-view report saved in a specific format. I need to change some specific features to reflect the upgrade in my program. How do you change the variable name to pull in that specific data? I opened the report, highlighted the grid, opened the…

  • Datapage+ Use Specific Database

    I don't know if this question has been asked before. I cant find anything. I understand that Datapage uses the Part Name from the program header to generate a database for that specific program. For the most part this is fine. But i have a need…

  • Tracefield help

    I have inputed a tracefield into my program but it will only let me typr in the value box when it pops up. How do I change this so I can type into the name of the box?

  • Multiple queries for datapage transactions.

    Alright so I am trying to set up some tracking a new part launch that we have. I have 7 machines running this part so I would like to set it up so that I can really narrow down the data and keep track of each one. Now I have figured out how to properly…

  • Size Feature and DataPage

    FYI The new size feature in PC-DMIS 2017 R1 does not import into DataPage+ 5.2 SP1. I use an external command to call up the DataPageStats.exe file. I have submitted a ticket about this into Tech Support. UPDATE from Tech Support: The external…
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement