hexagon logo
Register Sign in

Browse By Tags

  • How to remove comma from number value

    I have been trying to search how to remove the comma in the number for datapage 5.0. If I have a four digit number to the left of the decimal, there is a comma, ex. 1,234.00 I would like the number to show 1234.00. When I do my data-view charts with stat…

  • Part not in correct location?

    So... When I'm importing a LH part into datapage, my points are floating in the corners. When I import the LH fixture iges the same points work just fine.... when I import a LH part mating simulation iges the points work just fine. The RH part works just…

  • Updating point tolerances

    I have a run chart layout that's already been run and the customer wants to change the tolerances. Is there any way I can do this in Datapage? Or do I have to go through pc dmis and change them point by point? Thanks!

  • Datapage with different users

    So we have our datapage database installed on local drive....and in this day and age, everyone has their own network login credentials. This is creating problems with our datapage use. If Im logged on and running parts and then log off for the nightshift…

  • Missing Data

    I use the XMLSTATS/ON command to send xml files to our networked database. Sometimes, there is a instance where some data isn't there. Looking at the data editor in datapage, their will be a few cells here and there that are blank while others are complete…

  • Data page+

    Hi all, I am trying to set up a link up my SPC program to data page 5.0. I did the external command with the datastat.exe, I created a database , for the data importer I selected XML file however when I browse data page 5.0 for a path to monitor, I cannot…

  • Data importer path

    Hi all i am using Data page 5.0, how do I find the path to monitor for data importer. I selected XML file from data importer and browse in the data page 5.0 but is no directory for Stat file as shown in the coarse material

  • Date pages first time user

    Hi all , do i need to create a new database for every each different part I have to run . Date page was previously setup on my cmm system for two part numbers

  • Linking Datapage 5.2 and PCDmis 2016 to remote database.

    Running Win 7 / PcDmis 2016 / Datapage 5.2 We have several factory locations, so we are trying to link all CMM's together, common versions of PcDmis and Datapage. We would like to dump all of our reports into a common database, so that engineers and…

  • PDF printer error message

    Ive seen something similar in PCDMIS...like the drivers were uninstalled correctly. We are getting an error message that the printer is not activated, error code -41 in datapage. Its on AMYUNI document converter for printer settings. Any thoughts…

  • meaningful stats names from Pc dmis?

    Anyone know how to change Pc-Dmis deafault stats transfer titles to something a little bit more meaningful than data/time? When going through a full folder it's tough to see if I've exported all the proper stats that I require. I manually put…

  • Failed error: Index and length must refer to a location...

    Someone changed a setting in DP+, when trying to generate a report (CAD report, chart, text report) this message is displayed: Failed Index and length must refer to a location within the string. Parameter name: length Object reference not set to…

  • Ergebnis konverter

    Hi, I am using Result konverter to convert my measurements from pcdmis to excel, however, when I am running a loop which contains for example a circle diameter, it gives me the same name for all the circles in excel. I made the name variable so that it…

  • Adding a dimension after 30 Pc already ran

    So we measured 30 pcs and actually measured a hole but forgot to dimension it........so we went back and added the dimension on the last run (I did not save a program for each part run) and sent to stats. This did not update all 30 PCs...........what…

  • Error message: exception has been thrown by the target of an invocaton

    New to DataPage+. I am trying to create a custom report. I have selected the features and transactions. Pressed the apply button and gone to the Text tab and create custom excel report. I selected by .xls input and output. I selected the FeatureVariableName…

  • Failed to generate a user instance of SQL Server due to failure

    Failed to generate a user instance of SQL Server due to failure in starting the process for the user instance I got this error after having an issue with DP+ opening under a particular username. I figured out a fix before Hexagon could get back to…

  • ForHandledFiles / ForStatsFiles

    Stupid question, Ive got TONS of files sitting in both these folders, is it ok to delete them every now and then?

  • Datapage just got me good

    Ok, I have just realized that Im screwed from not knowing how to use datapage. I asked the question yesterday about deleting parts and empty variables. Now I just realized all my numbers are all mixed up with the nominals because I was changing things…

  • Datapage

    I haven't used datapage for sometime and need to create a new variable set. What are the steps to get this started.

  • Deleting a part from the database

    I am using Datpage 5 Release and I have looked up in the user manual how to delete parts and it says right click and chose delete. I do not have that option and the Hex Tec that was here installing it said I had full admin rights for it. Attached…

  • DataPage + 5.0 using the demo database...

    So the company I just started at is using the demo database that comes packaged with DP+. The help file in PC-DMIS specifically states to not use that database. DataPage + says it's ok. Anyone have any more info that could help me? I'm just worried that…

  • Inch resolution

    Question... Why does DP+ only go to five (5) places in inches? In PC-DMIS you can go out as far as you want.

  • Serial Number in excel report

    I use tracefields in pcdmis to enter SN, inpector etc. DataPage+ collects all dimensions properly but when I send them to excel Serial Numbers are missing in the reports any suggestion how to make it work?

  • Importing XML Transaction Files.

    Good morning everybody. I am encountering a unique situation today. I had some xml files of a part program ran on other machine. My datapage+ is showing all transaction out of tolerance even thought those are not. Please View pic and I hope I somebody…

  • database management

    Hello, Finally going all in with DP+ 5.0 after years with DPRT (had no choice). A couple of questions....in DPRT I would ASCII dump and then clear database to clean, had a directory of one transaction for each part number that I would ASCII load back…
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement