hexagon logo
Register Sign in

Browse By Tags

  • CSV Excel output of Comments

    I would like a comment to show up on my csv excel output report, but cant seem to figure out how. I have tried selecting different options, but have not had any luck so far. Is there a specific combination of options i need to have selected? or is it…

  • Reporting a diameter using 2 different fitting algorithms

    I would like to know how to measure a feature once, in my case a cylinder, and then report the diameter in both least squares and min inscribed. Does someone know how to do that? The only way I can think to do it now is to create 2 different cylinder…

  • Alternative way on Report

    Guys, I've just started to use PC-DMIS for CMMs, weeks ago. I need help on the reporting format, especially on the parts that require many measurements. As I'll be measuring all dimensions, based on drawing. Reporting with PC-DMIS can be tedious…

  • VBScript for reports

    Hello everyone, I got a problem.. When the measurement ends I want to save report to specific location, depending on where the part was made (we have same part, but we make it on 2 machines).. I am using PRINT command, but it sometimes saves blank…

  • Program/Report the SMALLEST diameter from mulitple measured diameters

    I have a diameter that is very slightly tapered but is square within CAD. From the top surface, I measure the diameter every 0.5mm measuring about 10 cirles in all. Im trying to figure out how to report ONLY the smallest diameter and not all 10 diameters…

  • Show File name in Report Header

    Hi Im new in PC-DMIS world (4.3 mr1, winxp:livid I create my personal label(fileheader.lbl) and i want show in program name(only xyz.PRG, not a full path). I dont want use macro or program variable etc... only xyz.lbl My problem is: look at…

  • wls qflash

    Is anyone using the new Hexagon qflash White Light Scan systems? I am looking for some user feedback regarding accuracy, issues, reporting, bugs etc. I have used a Steinbichler scanner with Polyworks, and also a Romer with Polyworks and I am wondering…

  • Export EXCEL/CSV from print commad only reporting first hit from Surface Profile

    So I have a program that inspects the hubs of a blisk. I use a loop (LOOP/START, LOOP/END type) to do each cavity, creating 90 vector points per hub, which I use to make a constructed scan and feed that into a surface profile. Have a print command at…

  • qFlash reporting options

    Good morning, I recently attended a demo of the Hexagon WLS qFlash system. I am looking for some feeedback on reporting options. I did not see any customized reporting like pc-dmis, but rather it reported in alphabetical order. Not much info is…

  • Removing or adjusting Datum references in True position reports

    I'm currently trying to measure a series of holes for true position. However, when I generate the report, EVERY entry includes three measurements. there's the feature (ex. circle 1) but then it also has entries for datums too. The datum entries all have…

  • Quindos Gear - sample inspection reports?

    Hello, I have not been able to track this down in any hexagon literature (with exception to the rather dated report from 1995). I need to see a couple of sample gear reports from Quindos Gear (version 7 if possible). I am assuming they are highly…

  • Report reading for enigneers

    Today the engineers are bothering me asking me how they can know what direction on the part the hole is out of tolerance. Like shown in the attachment. They like focusing on the graphical depiction of the out of tolerance. To be honest i'm not really…

  • Anybody have Excel Spreadsheet for Pc-Dmis

    Has anyone created or know of someone who has an Excel spreadsheet for multi inspection results that works with Cad++ version 2013? A lot of our customers require that we do final inspection reports on multi parts. If the order was for 120pcs we would…

  • 2010 MR3 reporting issues

    I'm stuck with 2010 MR3. We are accustomed to getting reports with color bands shown. Not xact meas, legacy style. Once in a while, after minor editting, the report shows up with all the "comment/rept" lines, but no values. No colors anywhere, just…

  • Pc-dmis to WINSPC?

    Has anyone connected WIN-SPC to there CMM? If so how did you manage it? We have WIN-SPC stations and I have been asked to make the reports from the CMM report in WINSPC. A small how to guide would be greatly appreciated

  • need help reporting in text mode

    I'm reporting in text mode. When I use xactmeasure on a 4 hole pattern, the report only shows one hole position. At the bottom of the TP it shows "4 hits" but it won't report the other 3 positions. Please help. Does anyone know how to fix this?

  • Hyperview Reporting (Need Help)

    Thanks to everyone in advance for taking the time to read an help with this... I am fairly new to PC DMIS and I have an upcoming project that will require the usage of the "Hyperview" Reporting format. What I need is for someone to lay out the basic…

  • Anyone use Discus and PC-DMIS?

    Just trying Discus http://www.discussoftware.com/ to see if it will speed up our FAI process. Just wondering if anyone is using it in anger and has any tips etc. One thing I would like to know is how to generate pcdmis reports in .txt format…

  • Part sepcific reporting

    Been a long time since I've posted here so I figured I better change that I have a custom report I've created (needed a few custom tracefields and operator inputs added) that I need to only be used on a specific part. Is that possible? I'd like…

  • PC DMIS Printing/Report Crash

    When trying to print a report to pdf/rtp the software just crashes. I have looked at the search paths and uninstalled and reinstalled the program but still have the same probelm. Does anyone have any ideas of what it could be please? See screenshot…

  • Report Editing

    Hello everyone, I am trying to modify the Text only template for 2010 MR3 and am having little success. I have read the help files and although they are fairly helpful on the process of modifying labels, they seem to be lacking the specifics needed. …

  • Custom Reporting

    hi all, My boss would like me to create a custom report for an airfoil. right now i have something like this Point #| +Tol | -Tol | Measured | Deviation| <- (as a label so it will show on the top of each page) point2 | .006 | .003 |…

  • RTF file outputs

    Please forgive my basic question, we have recently decided to change over to pc-dmis and I am releatively new. We are currently taking the .rtf in a txt format file and reading them into a 3rd party reporting software called 3DGDM. Obtaining the output…

  • Resize screen capture in report?

    Is there any way to resize the screen capture in the report so it fills the whole width of the page? See attached image: I'm thinking there must be a template somewhere which has attributes I could edit but it escapes my searches!

  • Reporting Questions

    I'm creating a report using the default PPAP.lbl labels to fill in information on top of a bitmap image of our companies' inspection sheet. The problem I'm having is I do not want 1 of 3 concentricity dimension labels to appear in the report but I do…
© 2025 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement