Is there any separate manual for Flow control commands, file i/o command, Assignments?
can someone please share it if anyone has it. this will be very helpful.
Hi everyone, I need a big help to complete my report loyout.
I saw from a client that it is possible to have label part (for example header fields) that are editable from the report window, by double-clicking on the part where you want to write.
I…
Hi! I noticed that automatic report saving doesnt work anymore. Now it asks where to safe the report. What is causing that?
STARTUP =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
ALIGNMENT/END
MODE/DCC
PREHIT/1.5
RETRACT/1.5
MOVESPEED/ 150
FORMAT…
Hi guys this is my first post so forgive me if I miss out any information, I'm recently updated to version 2021.1 (from 2020 R2) and am having an issue with positional dimensions in the "text only" report format.
Everything is displayed fine when the…
I have aligned one part and pln-1 in Y axis origin, after pln measurement when i report flatness of pln-1 with texture on options the meas value of y axis points does not match to the deviation. Could you please explain me the are different from each…
Hello all, I'm back.
The organization I'm at currently likes to run multiple parts in programs using "Paste with Pattern". I'm writing a program that measures 4 parts, and I would like it to print 4 clean reports. If I use 4 "PRINT/REPORT" commands…
Currently i am using pcdmis 2019 cad++ when i do the position of certain features it is not calculating bonus to the position feature, when i refresh that fcloc then close the program and reopen that it is calculated but position values changes automatically…
Hi All,
I recently took over as the supporting engineer for our CMM room and one of the initial things I'm working on is getting our software up to date. We have been running 2015 for quite a while and just recently updated to 2020 and we're running…
I have a program written out for a part that I am checking, but the customer wants me to send the report in a different format. He wants to have a picture of the CAD with an arrow pointing to and labeling each of the surface profile points (I have 140…
I want to be able to type in an answer to a question in the report.
Ex. Was part measured before or after coating?
or
Ex. type in material alloy
or a number of yes or no questions
I know about the manual Keyin Dimension, but I don't think…
Hi
Can Any one help me regarding my issue?. My issue is we are using loop command and when we are printing the reports so we are using our customize Header and footer. When PCDMIS is printing the report header and footer is coming same as per our…
Hi All,
We're currently making (and measuring) a very complex part that, among other things, has 10 fin-like projections that other parts fasten to. I would post a screenshot, but sadly it's ITAR. These fins have a .001"/1x1 flatness tolerance that…
Where I work I very frequently have position dimensions called out in sets. When the DRF is not fully constrained, or when there are MMB modifiers on datums, its critical to call the holes out as sets so any Datum Shift is the same for all the holes in…
I've got a part here that requires hundreds of inspections, so we created a fixture to run 15 of the parts in one execution so i'm not required to come back to the CMM every few minutes. I've hit a wall though where I need my reports to print per part…
All of my FAIRs and FIRs are bubbled such that the True Position and Size are two different bubbles and require two different
labeled dimensional readouts on my reports; thus, I make separate dimensions for size (diameter in this case) and true position…
Looking for help please!!!
I have been tasked with implementing an SPC process on a group of parts.
I was thinking of creating a "KC program" in which I have 4 of the same part located on a fixture.
The issue I have is I want to be able to…
I recently ran into an issue when reviewing reports that shows the following for a true position measurement in a CAD view:
I did some digging on both of our CMM stations thinking that one of them may have an oddball setting or a corrupt font…
Hi
My question is i always make a custom report with dimension labels showing deviation on cad model in report. To do that i mark my program then select the dimensions i took for that particular view- cut and undo them and they show up on CAD model…
I hope there is a simple solution for this. I tried searching the forum but found nothing related.
Here is my scenario:
The CMM operator runs the part and there are various errors. Some of them look like errors in programming. I take the PRG file…
Hello folks,
I am being tasked with a task for an R&R on our CMM, and though it seems simple enough, I realize there are several ways that are possible to structure the tests. I wanted to get some input about methods and see if it makes for a better…
Hello All,
We would like to be able to compile a database of measurements for a specific parameter or set of parameters that our programme records. Currently the results exist in their singular results files within PC-DMIS. I expect there is a way…
Forgive me if this has been asked before, but I can't locate it if it has.
My company is getting a new CMM, but did not order DataPage for it.
Can PC-Dmis export to datapage without having Datapage installed on that specific pc?
For example, CMM2…
When reporting a true position, should the Feature MMC bonus and Datum LMC bonus be added together, to give a an overall bonus.
Pc-Dmis defaults to adding the bonuses. Is this correct ?
The drawing call out = TP | (DIAMETRIC) 0.004 (MMC) | DATUM…
Hello,
I have a problem with exporting to txt file.
At our company we just get a new machine so now we have three of them. On all of them we measure with same programs.
So the problem is now we would like to include in txt file on which machine…
