solara.MP_01

Getting Started
"Getting Started" is a collection of topics intended to provide a rough overview of the most important issues to consider when getting started with Q-DAS Product Line desktop based products. It is intended for users with no previous knowledge. Link to: Getting Started

The solara.MP brief introduction gives a rough overview of the product itself. Part of the documentation is the intended use case and the main functions. This documentation is not by all means a substitute to detailed training but they can help the users with quick start. Link to: Brief Inroductions

Attributive Analysis
A separate topic deals with attributive analysis in solara.MP. Link to: Attributive Analysis

Measurement system capability according to MSA
Suitable measurement processes are required to achieve certain level of results. The MSA (Measurement Systems Analysis) reference manual often provides the basis for this decision. solara.MP is the tool of choice for instrument and gauge capability.solara.MP conducts necessary capability studies to establish measurement system capability. The main differences between generally accepted studies such as type-1 (Cg/Cgk), type-2 and type-3 studies (%GRR) or linearity and stability analyses are the applied calculation methods and the respective limit values. The software encompasses the procedures given in the MSA manual of the AIAG Core Tools and many other guidelines of the automotive industry.

Link to: Numerical Validation in solara.MP

Capability analysis according to VDA 5
Measurement processes are affected by a variety of influence quantities. Many standards thus demand the calculation of measurement uncertainty. VDA Volume 5 offers a practical approach and solara.MP helps to implement it easily and intuitively. The calculation of measurement uncertainty is based on an approach that is quite as pragmatical as a MSA capability analysis; however, it follows the specifications of GUM (Guide to the expression of uncertainty in measurement) or EN V 13005. solara.MP thus combines uncertainty components into an uncertainty budget and calculates the expanded measurement uncertainty U.

In a technical documentation, an attempt was made to explain the purely technical part of handling VDA5.

Stability-cards
In addition to the pure evaluation of stability data sets in solara.MP, the question of the further control chart, the interaction of solara.MP for evaluation, and the recording of data in the classic O-QIS products (procella) is increasingly coming up. This document attempts to show the basic features of this cooperation without going too deeply into the mathematics of stability control charts.

Bar colouring for attributive analysis
With version 14.0.3 the colouring of bars in graphs for the attributive analysis of the evaluation strategy has been adapted.

Output of AV and IA
Notes on the different outputs in solara.MP for the Reproducibility and the Interaction.

BIAS output for type 1
An FAQ explaining the additional BIAS output for a procedure 1, as well as the duet of the colour coding.

Position dependent capability index
A FAQ describing the Index C_loc

Eligibility Statement
Standards for Quality Management concretely require a confirmation for the eligibility of the applied software for the intended application, before initial use as well as for a continuous use. Link to: Eligibility Statement

solara.MP - Measurement System Analysis Type 1 Study 
This document explains how to perform a type 1 study using solara.MP, V11. 
Case Study Sample File: CAS_solara_Type_1.zip

English:PDF

German: PDF

solara.MP - Measurement System Analysis Type 2 Study
This document explains how to perform a type 2 study using solara.MP, V11. 
Case Study Sample File: CAS_solara_Type_2.zip

English: PDF

This series of articles provides simple examples that do not require in-depth knowledge. These can be thought of as click-through instructions for specific questions. Link to: How to.. for solara.MP