I'm close to buying one of these, with the Renishaw TP20. The demo I saw at Westec was impressive. I currently have a small B&S MicroVal running QC5000. I need to measure surfaces to +/-.00025". I hope to be able to use the vision and probe together in…
A few questions:
1. Is there a trick to doing the manual alignments? Can't seem to get it to work like normal CMM. Keeps asking me to pick something out in space...??
2. Does Pcdmis lock up on you a lot using tesa 300? V4.2 ....
3. Can you somehow…
Welcome!
I've been using PCDMIS 4.2 mr2 since one month. My main problem is a lack of outline of measured parts in the CAD view mode. I don't know how to solve this problem. Is it a problem of software or some preferences setup. Did anyone meet the…
Been looking at new machines as you well know and I wonder If any of the visual machines can check runout and Total runout.Some of the companies we have spoken to say they can.But from my understanding to actually check it you actually need to spin the…
I've been looking into vision systems also and B&S seem to be really limiting themselves.I have used PC-DMIS for a few years now and a lot of other software is coming out which seems muche easier to use.I have looked at systems from Micro-Vu and soon…
Should be an easy question.
Never used a tesa 300 before.(or any of the new systems for that matter)
When you turn the unit on (in the back) does the lamp automatically come on, or is there an icon in pcdmis that you have to click to make it come…
I have used PC-DMIS in the past,but the company I work for now doesn't want to be reliant on one person to run the machine.We have a PFX 4-5-4 right now and are currently looking to sell it.We have had a few demos of vision system equipment,but so far…
The new soon to be released version offers the following vision specific enhancements
New Hardware
==========
• TESA VISIO 500 Value & Universal Support
• TESA VISIO 200 Manual Support
• B&S Optiv Support
• Full Laser WhiteLightSensor…
Hi this is my first post. We have experience with vision systems, Nikon VMR-3020 & Ram Optical, but we are new to PCDMIS and tactile measurement. We purchased our system with the touch probe interface and also purchased a 4 port Renishaw probe changer…
This is my 1st post, just happened to google the words Tesa and here I am. I have driven a few CMM's over the last 20yrs or so. Started out with a DEA Big Gantry at Lear Seigler(Neway) Muskegon yrs ago which was a big table manual move machine. Then went…
I have an internal spline that I need to measure....no cad file . What is the best way to go about this on a vision sysem? The part has been edm wire cut and polished for a reasonably good picture
The new soon to be released version offers the following enhancements
New Hardware
==========
- TESA VISIO 300 Touch Probe support
- Rotary Table Support
- Mycrona Laser support
- OGP Smartscope (Pre 2000 models) Support
New Calibration…
We have a new Tesa Visio 300 DCC that was just calibrated last week. When I attempt to change the magnification, which is at the lowest setting (.7) I get an error saying that I am attempting to move outside of the calibrated range and it automatically…
Were are looking into purchasing the 300DCC model, but I noticed that this model does not have the ability to have both the Tesa-Vista software and the PC-DMIS Vision software loaded at the same time. My problem is that I have to different types of users…
Hey does have a mycrona? I am trying to program this machine but i am having troubles figuring how to make good aliments. i usually program A zeiss which is a totally different world. also has any one used this white light option we have it but no one…
Hello new to PC-DMIS. I have a vision system with a rotary table an Im trying to measure runout on a Headbolt head. I first scanned (Tactile) the cylinder of the bolt on one side 0 to 180 and scanned a plane 0 to 180 on the head flange. I tell the rotary…
Our lab ac turned off over the weekend and the granite needs to come back to lab temp before I can start running again. (Also I'm new to PC-DMIS, I should mention this) I have the temp probe on the granite can I do something to get a temperature readout…
Been running 2016 for a while. Just upgraded to 2021 and I can’t see my cad window. The graphic window is checked in the Insert drop down menu but it’s not showing, report window works. Graphics display works in 2016 but not 2021.
any ideas? Thanks…
