Hi guys,
I have a couple of issues when creating analysis views, can't seem to find solutions here or in the help file:
I have multiple analysis views on the report, some of which show the trihedron, some which don't. How do I show the trihedron…
So i love the ExcelFormReport but I can't figure out how to add more of the dimension info (K-FIELDS) to the ExcelFormReport.
We use Q-DAS so we can see all these beautiful K-FIELDS.
There is 229 of them but i can only put the standard 20 into my…
So i love the ExcelFormReport but I can't figure out how to add more of the dimension info (K-FIELDS) to the ExcelFormReport.
We use Q-DAS so we can see all these beautiful K-FIELDS.
There is 229 of them but i can only put the standard 20 into my…
Hi to everyone!
Here is the default FILE_HEADER.LBL. Is there any possibility to insert the C1.INPUT instead of the rev. number or the serial number?
Thanks in advance!
I came across a note on drawing which says
50% of the holes may exceed the drawing by 0.0003 10% of the holes may exceed the drawing by 0.005 if each of these are separated by at least (5) holes no more than 0.0003 over max
this needs to be checked…
Hi guys,
So I'm very new to CMM programing and only about a week or so after the first training class and wanted to know is anyone can guide me in the right direction on how to get the Header on the report to print on all the pages of the report for…
Hello everyone
I need to inspect some gage on a circular part as shown in image.
1st case : Diameter should be kept constant and distance to be inspected
2nd case : Distance should be kept constant and dimeter to be inspected
how should I proceed…
we are using following code to find max and min dia among 93 holes inspected
can someone suggest any alternate way?
ASSIGN/COUNT=0
ASSIGN/NUM_OF_DIM=93
ASSIGN/MMPROF1=0
ASSIGN/MMPROF2=0
ASSIGN/MAX_DIM=0
ASSIGN/MIN_DIM=0
ASSIGN/MAX_PROF=0
ASSIGN…
I have come across another issue that im having with exact measure ( i have not tried this on "geometric tolerance command" yet). The problem i am having is the datum shift when applied thru simultaneous evaluation (s.e.) is making erroneous datum shifts…
Hey all,
Does anyone know if there is a way to automatically add the bonus tolerance of a position onto the tolerance on the report. It would help out inspectors if the total tolerance was displayed. I don't get why it calculates the total for a position…
Is there any separate manual for Flow control commands, file i/o command, Assignments?
can someone please share it if anyone has it. this will be very helpful.
Hi everyone, I need a big help to complete my report loyout.
I saw from a client that it is possible to have label part (for example header fields) that are editable from the report window, by double-clicking on the part where you want to write.
I…
Hi! I noticed that automatic report saving doesnt work anymore. Now it asks where to safe the report. What is causing that?
STARTUP =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
ALIGNMENT/END
MODE/DCC
PREHIT/1.5
RETRACT/1.5
MOVESPEED/ 150
FORMAT…
Hi guys this is my first post so forgive me if I miss out any information, I'm recently updated to version 2021.1 (from 2020 R2) and am having an issue with positional dimensions in the "text only" report format.
Everything is displayed fine when the…
I have aligned one part and pln-1 in Y axis origin, after pln measurement when i report flatness of pln-1 with texture on options the meas value of y axis points does not match to the deviation. Could you please explain me the are different from each…
Hello all, I'm back.
The organization I'm at currently likes to run multiple parts in programs using "Paste with Pattern". I'm writing a program that measures 4 parts, and I would like it to print 4 clean reports. If I use 4 "PRINT/REPORT" commands…
Currently i am using pcdmis 2019 cad++ when i do the position of certain features it is not calculating bonus to the position feature, when i refresh that fcloc then close the program and reopen that it is calculated but position values changes automatically…
Hi All,
I recently took over as the supporting engineer for our CMM room and one of the initial things I'm working on is getting our software up to date. We have been running 2015 for quite a while and just recently updated to 2020 and we're running…
I have a program written out for a part that I am checking, but the customer wants me to send the report in a different format. He wants to have a picture of the CAD with an arrow pointing to and labeling each of the surface profile points (I have 140…
I want to be able to type in an answer to a question in the report.
Ex. Was part measured before or after coating?
or
Ex. type in material alloy
or a number of yes or no questions
I know about the manual Keyin Dimension, but I don't think…
Hi
Can Any one help me regarding my issue?. My issue is we are using loop command and when we are printing the reports so we are using our customize Header and footer. When PCDMIS is printing the report header and footer is coming same as per our…
Hi All,
We're currently making (and measuring) a very complex part that, among other things, has 10 fin-like projections that other parts fasten to. I would post a screenshot, but sadly it's ITAR. These fins have a .001"/1x1 flatness tolerance that…
