I'm trying to get this to work. I thought I have it set-up OK, just that when I run the parts, nothing happens. It appears to update OK, just that nothing changes.
Any thoughts or ideas? Does anyone use this on a regular basis? My boss wants us to…
I have a study that is fairly small but unfortunately the part name needed to be changed and was changed last night so i need to know if/how i can move all the old results into the new name and then when i update from DMIS from now on I will get all the…
In the older vrs of PC dmis (3.7mr3) Pc dmis generated a file called "Xstat11" , and it was located in the C drive under PC dmis folder. We are running a new vrs. called STI+ / 4.2mr3, and I can't find the file that PC dmis generates for the data to transfer…
Hello,
I'm having trouble with trim points on dataview. When dataview reports on some trim points their "T" value reports F/A when the vector is c/c. It only makes this mistake when the prehit direction (form) deviates further than the trim. So if the…
Good morning to all. My question today is. Can you delete a transaction from the data base? Example your running a part in PCDMIS and the data is sent to Datapage , you now realize that the data is bad , you would like to remove just that transaction…
I am receiving this error when logging into Datapage.
datapage.exe has generated errors and will be closed by Windows. You will need to restart the program.
An error is being created.
Has anyone ran into this before?
It was working fine until one of the inspectors shut it down, now it will not open up. I thought the database was corrupt and made a new one but still does not work. I went into Editor and can see the data in the database so I know it's getting in there…
Still new at datapage and PCDMIS. So please forgive me if my question dose not come out right. my boss wants to know if you can sort the data by vendor, not just part number? I think you would creat a Query by using the vendors name? I'm guessing I need…
As an IT technical support tech. I have a problems with both DataPage and PC-DMIS. It seems they both want to hog the processor at 100% for long periods of time. Sometimes the user has to reboot. CMM operator had a Windows 2000 PC that was quickly failing…
I'm use to standard charts, histogram with cpk, xbar, etc.. I'm just not getting the whole datapage thing and the way the carts look.
Then I'd like to extract the raw data so I can use minitab (copy / paste) but I cant figure out how.
I'm not interested…
Hi. Thank you for your replys. I must be missing something because I still can't get pcdmis and datapage to work? So here is what I do step by step.
I go to datapage, file menu, Editor. Database, New,Create a new database window opens. I go to browse…
I'm very new to PCDMIS and DATA PAGE. How do you even get your Data from your Parts to Data page? I'm using the PCD2Excel Wizard after each part and that gives me the data in spread sheet form but I have no clue how to get the info to Datapage? Where…
Apparantly not many folks use it bit is
anyone using it?
Some of my customers are limited by their inability to visualize reported data
in excel format so I'm thinking I should check out Dataview since we already paid for it.
Anyone?
Thanks…
Anyone know where i can get a datapage user manual? My employer wont pay for the class but wants me to learn how to make specific charts and graphs showing the part. Anyone have any idea?
I'm using Dataview for Windows v3.22. When creating a Dataview report of the X,Y,DF,TP of a hole I'm having an issue. The true position tolerance of the hole is 0.5mm, size tolerance is ±0.5mm. I measure the hole and the true position is 0.523mm but with…
Hope im not offending anyone, but a new customer of mine has to have there reports in a certain excel layout format and they take the data from datapage to transfer it to there format. So it would take me forever to hand type in every x,y,z location for…
Anyone know what this is? We are trying to do a GR&R with "
5 parts x 2 trials x 2 operators " and we keep getting this error when trying to generate a GR&R report???
Well I'm having problems with my editor today.
It well not turn on, DP/ RT starts up but I get error # -24
"attemp to access unlocked record or set"
I did delete " Vista.taf,Lockmgr.dbl didn't help
So what next any have a thought on this.
…
Hello all,
I know i'm probably pushing it by asking this but, is it possible to report attribute data from Pc-Dmis to Datadatapge?
Is there an option in PcDmis other than comment input box to collect attribute (pass/fail) data and send to DataPage…
Our production part audit programs use a subroutine that sends a DataPage Spreadsheet report to a .txt file, which then goes to an Excel spreadsheet to display run charts. DP must be running to send the report.
Earlier this week, one of our machines…
Hi everyone,
I run into little problem with DataPage.
I'm exporting data from Pc-Dmis V4.3 to Datapage 3.33 with Feature Names selected. For some reason my keyed in dimensions report as Emptyfeat.m
When i export using Dimension Names, my keyed…
When I run my part through, normally, it sends the stats to Datapage at the end of the program. Now, I'm getting an error message: "Cant open dbd File - Error 5". HELP!
here's a good one...
if you're ever locked out of the datapage editor by a password unknown to you
enter this over-ride password
3.1416
thanks goes to James Mannes....he dug this up for me
i ran 6 parts all sent to data page. #3 needs to be reran. what i do is go to datapage editor , view/datavalues/data and cause codes highlight the line i want to delete then go to edit delete selected transations and its gone. or run new part as # 7 then…
