Guys,
I've just started to use PC-DMIS for CMMs, weeks ago.
I need help on the reporting format, especially on the parts that require many measurements.
As I'll be measuring all dimensions, based on drawing.
Reporting with PC-DMIS can be tedious…
Hello everyone,
I got a problem.. When the measurement ends I want to save report to specific location, depending on where the part was made (we have same part, but we make it on 2 machines)..
I am using PRINT command, but it sometimes saves blank…
I have a diameter that is very slightly tapered but is square within CAD. From the top surface, I measure the diameter every 0.5mm measuring about 10 cirles in all.
Im trying to figure out how to report ONLY the smallest diameter and not all 10 diameters…
Hello
I'm farily new to PC-Dmis, using a romer arm atm.
How do i re-measure something after my program is done and the report generated?
I have highlighted the elements that i want to remeasure and chosen "execute block".
And everything…
Hi all! I've got a program that loops to measure four parts on one run. The program loops properly and gives me four separate reports except after the first run our company header is not carried on past the first report. What am i missing? I know I am…
So i'm really hoping there is a fix for this. I have tried a million different things and I still can not seem to get this to work correctly.
Im using PC-DMIS 2014.1 64bit & 2015.0 64 bit
When loading my reports i use the default layout, and everything…
Hi! I am Korean PC-DMIS User.
I Use excel report basic script.
But my script can report only regacy dimension data.
If I report GD&T geometric data, my script can't report to excel.
How can I use regacy + GD&T data to report excel file…
Hello. I am new to the site and tried the search feature, but I did not find an answer to my question.
Our customer changed the part number after a recent major modification. We changed our file name to reflect the new part number and revision. How…
I have gone back and forth with these for a couple years, but i think I really like this one. Anyone else doing something similar?
I wanted to know if i could change a few things from the command mode cells. I want to change Rev Nuber:, Ser Number…
I have been having an issue with our night shift operators that cant seem to read their reports before sending them along to the next op. This is the 3rd time that parts have been sent back because a bad report was sent to a customer. Each group that…
I have a quick question about the reporting format. I have a part that I am checking and one of the dimensions has a profile tolerance. I would to set the report up so that parts measuring negative for that specific dimension will display a warning. I…
Hello there! I don't know what setting button i might have clicked, but when i open my edit window, it only shows the features
that are out of tolerance. I check the f9 settings on the measured features and they all have the output to send out to both…
Two problems using this report:
1.0 - Setting the report to NOT use text mode (right click/use text mode for dimension CHECK BOX UNMARK) I get the report with the fancy header, columns, check marks for OK KO) I get the full report. PERFECT.
1.2 –…
Hello All,
Has anyone come across a problem when a custom report with your company logo on the top-left does not replace the PC-Dmis logo on subsequent reports for the rest of the parts measured. I have gone and replaced the default header label to…
I am using PCDMIS 2011 MR1 measuring blades. The data is sent from pcdmis into Blade for analysis. I get a 27 page report in blade which includes plots of the measured sections of the blade as well as numerical text of the dimensions within each section…
I'm reporting the true position of a single diameter. My report shows the following boxes:
FCFLOC1 Size
FCFLOC1 Position
FCFLOC1 Datum Shift
FCFLOC1 Summary FIT TO DATUMS = ON, DEV PERPEN CENTERLINE = ON
I don't really want to see the bottom…
Has anyone created or know of someone who has an Excel spreadsheet for multi inspection results that works with Cad++ version 2013? A lot of our customers require that we do final inspection reports on multi parts. If the order was for 120pcs we would…
Hello all,
I was wondering how I might be able to increment the "serial numbers" in the reports of each instances of the program instead of incrementing the "part name?" It currently outputs the part name (program title). Where do I need to go to…
Hello,
I would like to find out how I can change the color of the deviation bars that appear on the reports. Currently it comes out in different colors and I would like to simplify things by changing it to either red or green. I am fairly new to PC…
I'm stuck with 2010 MR3. We are accustomed to getting reports with color bands shown.
Not xact meas, legacy style. Once in a while, after minor editting, the report shows up with all the "comment/rept" lines,
but no values. No colors anywhere, just…
Is there anyone who knows how to create 2 reports in 1 program? (V2012 MR1 SP2)
Explination: I have been tasked to output a 'normal' output of the print requirements, additionally I need to have the xyz cordinates for a portion of the points in my…
Hi
So my report should be 3 pages, but it gives me 4 instead and the #2 page is blank, does anyone know how to get rid of that blank page? I don't really like an empty page in the middle of my report.
Thank you so much
Is there a way to report the run time on the reports?
i.e. "# of Hours =00:32:26"
I remember a few version ago it was on there but wasn't really concerned with it not being there. Well, I would kind of like it now...
My report window in 2012 mr1 has a hiccup! It was working fine friday until the latter part of the day when all of the sudden, the report window lost all of the icons for the different types of reports. The icons buttons for text only, text+cad, cad only…
I have tried to find a forum on this but couldn't. If one is out there already please lead me to it. I want to print a report and have it automatically be opened for view by pc-dmis before the end of the program. That way the operator can decide whether…
