Hello, I'm programming on a new CMM and having issues with my manual alignments. I have been programming in offline mode and whenever I try to run my programs on the machine after I pick up my manual alignment I get this error message: ERROR CE ,S% ,TR_CE…
How it is possible ??
Is it really my software doing this ??
I cannot believe it but yes !! PC-DMIS did it !! so i share it with you, and please share what was your bugs today ?
I believe its good idea to learn, to be prepared for, to have fun …
Hello everyone im having this issue with my CMM its a Brown & Sharpe Xcel with a Sharp32 controller, the error that im having its DDOF: Waiting For In Position, what happens its when i calibrate my tips and it starts the DCC move on the Z axis touches…
Good afternoon all,
I am trying to set up a quick program to measure a true position call out for a part we are running at the shop. it is a small bushing and the TP call out is the O.D. cylinder to the I.D. cylinder (datum A) and a perpendicular…
We just bought this Romer Arm about a month ago, i just set it up last week and had it working fine. its a CP-C as in the topic title its a wired connection. I was probing, scanning and using it like normal so the next day i come in to reconnect everything…
Hi all,
Just a quick post, recently updated our CMM online and our offline programming seats to 2022.2 SP3, ever since we have had lots of crashing on one of our online seats without any error messages, and tip errors on another seat, this has began…
I recently was tasked with measuring a part bent at an angle with a pattern of holes on both surfaces of the bend. The bottom plane is Datum A, the bottom pattern of holes is Datum B. There is a profile locating all of the edges on the bottom plane to…
I am newer to programing and mostly just use the vision part of my machine. But seem to be having some issues with the Tactile side of my machine.
Half way though probe calibration I get this "Measured probe diameter error exceeds limits." It then…
HELLO TO EVERYONE
I have a romer absolute arm and I ussualy work with it with no problems with RDS appicacion and Polyworks software.
On Friday, suddenly, when I turned on the computer on the RDS panel i have the message that the arm is offline and…
Hello everyone,
I'm working on a program with 2021.1 in which, it's been observed when using paste with pattern line created using a circle and a point is not generating properly.
upon pasting with pattern new lines generated doesn't includes circle…
Hello everyone!
last week i came across an issue in which first hole was mismarked during production.
The part was similar to attached image with two set of holes 1st set has 30 holes and 2nd has 59, in which 1st hole of both set are inline with each…
I have come across another issue that im having with exact measure ( i have not tried this on "geometric tolerance command" yet). The problem i am having is the datum shift when applied thru simultaneous evaluation (s.e.) is making erroneous datum shifts…
Need to calculate these from a set of 8 results
[Spacing error not to exceed 0.005, spacing between adjacent slot 0.003, 1 place may be 0.005 max]
I am using following code to calculate spacing error within 0.005, but I'm not sure how to find "…
Need help!! Not sure why PC-DMIS keeps giving me bad results. I have created different alignments, different hits, different workplanes and views but PC-DMIS still gives me wrong numbers. Any suggestions on what is going on?
On the blueprint I have…
Hi guys this is my first post so forgive me if I miss out any information, I'm recently updated to version 2021.1 (from 2020 R2) and am having an issue with positional dimensions in the "text only" report format.
Everything is displayed fine when the…
When the pc-dmis software shuts down abnormally, the program does not appear in command mode.
In summary mode, it is displayed normally.
There is no problem running in command mode, but the components are invisible.
After switching to summary…
Ok so I have stolen some code from here on using a script to open a program and run it, then closes the program. It runs and works perfectly... UNTIL I try to make the filepath variable, such as ("C:\Users\Public\Desktop" + strID ) so that I can use a…
Hello,
I am having trouble understanding how this TP callout can be out by so much. I attached a pic of what the report looks like and the code is shown below. Does anybody have any ideas? I have tried redoing the alignment but that did not…
Every time I search these forums for any information regarding this new software I am met with no information as it seems no one is using this software. Is it irrelevant for experienced CMM Programmers/Users or is it just a problematic software (like…
Hello All,
My company has recently run a program on two CMMs.
The first time the program was run, each loadprobe line would prompt the operator to load that probe before moving forward.
When the program was run on a different CMM, the program…
Not really sure where to exactly i should've posted this but its here now. I am recently new to CMM so im still learning alot. That being said I have a slight issue with something im trying to do with my CMM I am trying to do an adaptive circle scan on…
I have been getting an error on my CMM when it changes probe angles. It is the TR_FG014 Wrist Error. I have been looking through the forum and have found some similar problems but not the same.
It is a PH9A Renishaw probe.
The problem has been…
The clear planes in my program do not want to co-operate today. I'm using a read point for the manual alignment, as far as I can see I did not forget to translate my Z. DCC_ORG Is a circle that takes 3 sample hits on the Z=0 surface I want. The clearplane…
