Hi,
I'm having an odd problem with the newest version of PC DMIS 2013. Every time I have a probe change during my program the CMM wants to make an absolute move way up into the rafters. There is no probe changer associated with this machine and the…
I just had Cad++ installed and I am having problems when I probe a hole and my probe retracts past the center of the hole and hits the back of the hole which inturn retracts and hits the front of the hole and goes into a loop of back and forth hits. I…
I bought new probes a week or so ago. I went to use one and was trying to set one up in my probe dialog box. My new probe isnt listed in the drop down. How do I enter it in so I can use them?
About to put in a tech support ticket, but they are slow so.... it is a race to see if you can fix this first.
2mmx30mm probe measure outside cylinder. Then measure the same cylinder with a 4mmX40mm probe. The measured diameters are exactly the same…
Hi everyone,
I'm just getting started with PC-Dmis and have come across different programs that show the probe in a wire frame and the probe solid in the graphics display window. My question is how do I convert the solid probe to a wire frame probe…
If so I was wondering where can I find more information of what the probe head can or can't do. Also what it can and can't use for stylus, extensions, etc.. I am new to the cmm world and I am building my tool box up this week thanks to my courteous owner…
When building a new probe file to replace the current probe file (current file is corrupt or otherwise because it won't calibrate at any other wrist angle than A0B0), can I just simply go to windows explorer to rename it or will this cause problems when…
I am having a problem getting my 1mmx27.5 probe tip to calibrate.
I have cleaned the 1mm ruby tip and the calibration sphere. I even changed out the 1mm tip with a new one.
Here is the report:
Probe file=T-PROBE_T1X27_M2 Date=6/17/2013 Time…
I changed the tip in one of the slots in the probe changer, it works fine until i turn off Pc-Dmis. The next time I load Dmis it reverts back to thinking the old tip is in that slot still. So i have to tell it again what is going on, and then it will…
Hey guys/gals!
I have a probe changer that works perfectly, but i have a part on the table that i am programing for that is so large that it intrudes into the probe changing area. This happens frequently enough that I need a way to disable the changer…
On a 6 axis absolute arm is it possible to calibrate and use a probe that doesn't have the electronics working in it?
Is there a way to disable the electronics and just tell it which probe you have on manually?
Can you still just quick change…
Hello,
We have an older CMM which is a MicroVal PFX 4-5-4 running PCDMIS 3.5 MR2 on Windows 2000. that's right WIN2000. We had to do a hard drive wipe and a full reinstall after backing everything up. We are using a Renishaw MIP probe with various…
Dear everybody!
This is my first post.
has anybody an idea?
my problem is next.:
I got a question about DMIS from one user, and I can not find a solution yet.
The following should be the case. During the test run (animate path) in online version…
Hello, one quick question. (I'm utilizing 3.7)
When building probe tips, I've always used what was available in the Probe Utilities Box pull-downs. Now I've come acrossed a Ø.5mm x 20mm tip(#A-5003-1345) that I need to use and the only tips available…
I'm using v3.7 mr3. I qualify on a 1" sphere, "yes" to has it moved. This updates that spheres XYZ definition.
I switch probe configurations, select the same sphere, "no" it hasn't moved. The spheres' definition is not the same as after the first qualify…
Somehow, my Probe Changer Data got corrupted / erased. What is the name & location of the file that stores this data? Is there a canned routine in PC-DMIS (2010 MR3) that periodically backs this up? Now I have to re-learn all of the 12 FCR25 locations…
Please help .....
Recently had our CNC Mistral PAT tested but when the power was turned back on we were unable to operate machine, computer will power up, there is power going to the main circuit board, the probe will beep when touched but the light…
One of the guys i work with went to run a part on the CMM and couldn't get the probe head to move. It came up with (Error Message: TR_FG025, Illegal Unlock Condition). Does anybody have any clue as to what this error message is and how to fix the problem…
