The reference codes in the overall evaluation (output point 15000) are displayed instead of the smiley (arrows):
Codes in qs-STAT and solara.MP
| 10 |
Specification limits where not been recorded. On the characteristic mask no upper and no lower specification limit is recorded.
|
| 12 |
Insufficient number of values / subgroups. Every Strategy has a defined minimum number of values, and for the process capability also a defined minimum number of subgroups, before an evaluation is allowed to be done. the minimum values can be seen in the strategy and can be different for stable / unstable, Normal distributed / nor normal distributed, Positional tolerances and many more.
|
Codes in solara.MP
| 11 |
Capability indices where not calculated. The reason must be read in the error codes of the C-values. one possibility can be for example, that in a type 1, the "actual value of the Master" has not been collected:
|
| 18 |
Test system resolution not given.
|
