The text output of the “Capability” contains various information and notes
After the text output, the requirements that are set as requirements for this characteristic in the strategy are listed in brackets. The underlined elements are those where the requirements are not met.
Limited capabilities
In the evaluation strategy, certain conditions can be activated if the actual requirements are mathematically fulfilled, but for safety reasons, no capability is to be output, only a “limited capability”. As an example, since this is often used: a limited capability when there are too few measured values.
The corresponding code is then shown in brackets in the text:
List of L-conditions
| Code | Description | Remark |
| L1 | ||
| L2 | ||
| L3 | ||
| L4 | ||
| L5 | ||
| L6 | ||
| L7 | ||
| L8 |