Manual Upload

Available from version 13.0.5, a light version of Q-DM (Upload) is provided with "Manual Upload". It allows users to manually upload DFQ files to the value database.

It provides a simple interface to select the path from which the data will be uploaded to the value database. When the selection is made, the path is stored in the product INI file.

	The following rules apply to manual uploads and cannot be changed:
	The key fields used are K1001, K1002, K2001 and K2002. As of version 14.0.4.5, the K5003 is also a key field.
	The upload always takes the part measurement into account.
	Duplicate entries for key fields at the characteristic level are treated as errors.
	Handling of empty key fields Up to version 14.0.4.4, empty key fields are treated as errors. From version 14.0.3.3 and 14.0.4.1, if K1001 is empty, it is automatically filled with "n/a" (not available). From version 14.0.4.5, empty key fields are no longer treated as errors. The quality of the data is the responsibility of the customer.
	All DFQ files in the selected folder and subfolders will be uploaded.
	Files with implausible k-field contents are treated as errors.
	Files that have been successfully uploaded will be deleted.
	Files that have not been uploaded due to an error will be retained.
	The overwrite rule always applies, both part data and characteristic data of existing records in the database will be overwritten.
	The Q-DM must be purchased if these rules are not sufficient. All options can be set here.

Recommended